Multiple coils are used in inductive power transfer (IPT) systems to ensure the effectiveness of high-power applications. Furthermore, recent research indicates that dual receivers can function well in dynamic wireless power transfer (WPT) applications. However, the system efficiency reduces if the cross-coupling among the same side coils is not eliminated. In this article, a new IPT system with dual receivers that has similar characteristics as dual DD receivers have been introduced. Besides mitigating the mutual inductances of the same-side coils, the proposed dual receivers use fewer components than the capacitive decoupling method. Additionally, the proposed coils can receive power throughout a full 360° rotation and have good rotational misalignment performance. Compared to the conventional dual DD receiver, the proposed system can achieve higher efficiency and deliver significantly more power in the misalignment range of 45° to 135°. Also, the proposed coupler gets full power compared to dual DD receivers at 90° misalignment, whereas conventional dual DD receivers receive zero power. A scaled-down experimental setup is used to verify the feasibility of the proposed structure. The proposed system was also experimentally tested for applications with dual output channels. It’s been observed that in this case the proposed system has also better rotational misalignment tolerance, lateral misalignment tolerance and higher efficiency at different loads compared to the conventional system.
21 August 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The rapid reduction of power transfer efficiency with misalignment is a matter of grave concern for compact high power WPT systems. The misalignment tolerance can be increased by using complex control techniques but the efficient misalignment operation range is still narrow and efficiency drops significantly beyond that range. This paper proposes a novel natural decoupling method to enhance the efficient misalignment operation range for identical symmetrical quadruple-D coils arranged in a dual-transmitter-dual-receiver configuration without requiring any control. Decoupling of multiple transmitters and receivers is essential for efficient zero phase angle (ZPA) operation. At fully aligned condition the experimental prototype of this design exhibits a peak efficiency of 96% at 2.25 kW output power for a vertical distance of 150 mm. The misalignment operation range extends from +300 mm to -100 mm for a 400 mm x 400 mm coil size with almost constant efficiency (94.78% - 96.19%). The rated power operation points occur at 0 mm (fully aligned) and also at +200 mm (50% misaligned position) thus making it possible to obtain full rated power without fully aligning the EV.
7 January 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Wireless power transfer (WPT) presents a promising approach for charging electric vehicles (EVs), offering increased convenience, reliability, and safety for EV customers. Recently, the incorporation of multiple coil structures in wireless charging systems has addressed various operational challenges, enhanced power transfer, and provided a scalable solution for EVs. However, cross-coupling issues and space limitation problems arise when multiple coils are introduced to the WPT system. In this paper, a novel integrated compact coupler is proposed, including two naturally decoupled coils on the transmitter side, while both are coupled with the receiver coil to improve the power transfer capability of the system. ANSYS Maxwell is employed to simulate the proposed coupler and evaluate its performance under misalignment operations. The proposed wireless charging system inherently detects misalignment direction based on the variation of output voltage with respect to x-misalignment. As a result, the experimental prototype of the designed wireless WPT system presents a peak efficiency of 97.08% at 1.147-kW output power for an air gap of 120 mm under fully-aligned condition. Additionally, the designed compensation coil can transfer power of 243.76-W under fully-aligned condition and increases reliability in power transfer during misalignment operations.
6 April 2026 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Enhancing gain in Wireless Power Transfer (WPT) systems traditionally requires redesigning key components such as the coil, compensation network, control strategies, or the inclusion of power converters and switched reactive networks. This paper presents a modular, interoperable and cost-effective solution for LCC-S compensated WPT systems that achieves voltage gain enhancement without the need for complex control mechanisms, offering a simplified and efficient alternative to existing methods.. The proposed passive network is inherently interoperable with any LCC-S WPT architecture, maintaining a consistent gain at the operating frequency regardless of coil parameters or loading conditions, while maintaining Zero Phase Angle (ZPA) operation to ensure high efficiency and stable power transfer. A 1 kW laboratory prototype demonstrates a fixed voltage gain of 2 at approximately 92% DC-DC efficiency, validating the network’s tuning-free performance across different output voltages and under x- and y-axis coil misalignments. The results confirm that the proposed boost-π network provides a compact, interoperable and modular practical solution for scalable high-power WPT applications.
1 January 2026 in IEEE Transactions on Transportation Electrification