Harshavardhan Bettegowda

Harshavardhan Bettegowda

Auto-generated profile, based on publicly available information

Harshavardhan Bettegowda

The National Institute of Engineering

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 March 2023 in Tribology in Industry
Verified
Journal Article
Closed access
SBSuresha Bheemappa
Suresha Bheemappa
SVShivaprakash Vidyashree
Shivaprakash Vidyashree
HBHarshavardhan Bettegowda
Harshavardhan Bettegowda
When creating polymer-based composites, plain weave fabrics and micron-sized fillers offer bidirectional strength and reduced voids/inhomogeneity. In the present work, It was investigated how glass fabric reinforced epoxy composite (G-E) performed during three-body abrasive wear with and without ceramic fillers (SiO2, Al2O3, graphite, and fly ash cenospheres). In experiments, loads of 20 N and 40 N were applied at various abrading distances of 500 m, 1000 m, 1500 m, and 2000 m. According to the results of sand abrasive wear test, the specific wear rates of G-E based composites are sensitive to fibre and filler/matrix adhesion. Under all tribo-test settings, the SWR for all particulate G-E composites decreases in the following order: G-E > Gr/G-E > SiO2/G-E > Al2O3/G-E > fly ash cenosphere/G-E. Furthermore, the specific wear rate of the fly ash cenosphere filled G-E composites were found to be lower than the G-E and other filler materials filled G-E composites. There was 38.7% reduction in the specific wear rate at 40 N, 2000 m in fly ash cenosphere filled G-E composite. As per the evidence of scanning electron microscope images of worn-out surfaces, mechanisms such as ploughing, fibre breakage, fibre pull-out, fibre thinning, and a network of microcracks caused the wear in composites.

16 October 2020 in Materials Today: Proceedings
Verified
Journal Article
Closed access
BHB. Harshavardhan
B. Harshavardhan
RRR. Ravishankar
R. Ravishankar
BSB. Suresha
B. Suresha
SSS. Srinivas
S. Srinivas
UDU. Arun C. Dixit
U. Arun C. Dixit

1 November 2019 in Applied Mechanics and Materials
Verified
Journal Article
Closed access
PDF file
BHB. Harshavardhan
B. Harshavardhan
RRR. Ravishankar
R. Ravishankar
BSBheemappa Suresha
Bheemappa Suresha
SSS. Srinivas
S. Srinivas
This study has been carried out to demonstrate the effect of short carbon fiber (SCF) loading on static and dynamic mechanical performance of polyethersulfone (PES) composites. Different combinations of SCF/PES composites were prepared by extrusion followed by injection molding. The static mechanical properties such as hardness, tensile and flexural properties of PES based composites were analyzed following ISO standards. As engineering materials, the polymer composites with high modulus as well as excellent damping properties are of great interest in aerospace and automotive industries for severe dynamic environment. Furthermore, in addition to static properties of composites, dynamic mechanical behaviour of PES based composites was evaluated. Mechanical test results showed that increasing the SCF wt. % in the composites increases the hardness, tensile and flexural properties. Furthermore, the optimal SCF loading was found to be 30 wt. % for significantly improving the overall composite mechanical performance. Upon the reinforcing of SCFs, an improvement in the storage modulus was found. Based on the fractographic analysis, orientation and aligned structure of carbon fibers, good bonding of fibers within the matrix and better fiber-matrix interaction were the primary reasons leading to the improvement of mechanical properties. The optimized composite (PES with 30 wt. % of SCF) could be used in automotive components like frames, flap covers and gears of printing machinery.

1 January 2020 in Materials Today: Proceedings
Verified
Journal Article
Closed access
BSB. Suresha
B. Suresha
BHB. Harshavardhan
B. Harshavardhan
ARAshwij M. Rao
Ashwij M. Rao
UKU.R. Koushik
U.R. Koushik
RHR. Hemanth
R. Hemanth

1 January 2018 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
PDF file
SBSuresha Bheemappa
Suresha Bheemappa
BHB. Harshavardhan
B. Harshavardhan
RRR. Ravishankar
R. Ravishankar
The present investigation deals with the fabrication and characterization of epoxy reinforced with bidirectional carbon fiber mat (CF/Ep) and filled with 2.5, 5 and 7.5 wt% potassium titanate whiskers (PTw) composites. The effect of PTw loading on hardness, tensile properties and dry sliding wear behaviour of CF/Ep composite were carefully investigated in expectation of providing valuable information for the application of hybrid CF/Ep composites. Results indicated that the incorporation of PTw actually improved the hardness, tensile strength and tensile modulus of CF/Ep composites. Meanwhile, the specific wear rate of CF/Ep filled by 5 wt % PTw reached to 6.3× 10−14 m3/N-m, which is 41% lower than that of CF/Ep composite at the same dry sliding condition. It also seen that the fiber and filler worked synergistically to enhance the wear resistance. Further, for all composites the friction coefficient increases with increase in load and sliding velocity. However, PTw reinforced CF/Ep exhibited considerably higher coefficient of friction compared to unfilled ones, while PTw filler loading of 5 wt% was effective in reducing the specific wear rate of CF/Ep composite. The carbon fiber carried the applied load between the contact surfaces and protected the epoxy from severe abrasion of the counterface. At the same time, the exposed PTw out of the epoxy matrix around the fiber inhibited the direct scraping between the fiber and counterface so that the fibers could be less directly impacted during the subsequent wear process and they were protected from severe damage.