20 January 2026 in Aerospace Science and Technology
16 September 2026 in Aerospace Science and Technology
10 July 2026 in SSRN Electronic Journal
The endwall clearance of adjustable guide vanes in variable geometry turbines (VGTs) is often simplified as a uniform or averaged value, whereas actual vane rotation about a pivot produces a chordwise non-uniform clearance distribution. This study investigates the formation and aerodynamic consequences of rotation-induced non-uniform clearance, aiming to identify the leakage-controlling region and provide guidance for pivot layout and clearance control. A geometry-based parametric representation is developed, and numerical simulations combined with orthogonal design and analysis of variance are used to quantify the effects of clearance parameters in different chordwise regions. The results show that averaged clearance alone is insufficient to characterize the aerodynamic response: configurations with similar mean clearance can produce more than 25% variation in leakage mass flow rate. The mid-chord region, approximately 40%–80% of the axial chord, is identified as the leakage-controlling region (LCR), contributing 62.6%–66.9% of the total leakage mass flow. This region also corresponds to the strongest leakage–mainstream momentum exchange and the primary source of downstream loss accumulation. Under transonic conditions, shock–leakage interaction increases the sensitivity of trailing-edge clearance, but the dominant role of the LCR remains unchanged. Further analysis of realistic vane adjustment shows that pivot layout affects endwall loss by controlling both clearance redistribution and local leakage development within the LCR. These findings indicate that VGT endwall design should focus on controlling clearance evolution in the LCR, providing a physics-based basis for pivot layout and clearance management.