1 December 2010 in Energy
1 June 2011 in Applied Energy
1 February 2001 in Soil Science
The measurement of soil air permeability is a fast and easy method that can be used in different ways to characterize the soil. An air permeameter was constructed in order to measure air permeability (ka) in situ, on-site (exhumed soil samples), and in the laboratory on a wide range of Danish agricultural soils. Two different sizes of sample rings were used (100 cm3 and 3140 cm3). The device was initially tested in the laboratory on repacked soil samples to evaluate dependency of ka on sample size. The results showed consistent values of ka for both sample sizes, indicating only little scale effect. In the field, air permeability was measured in situ and on-site using large sample rings. Air permeability in situ was determined by using a "shape factor" taking into account boundary conditions at the lower end of the ring while assuming isotropic soil conditions. An expression for the shape factor developed by Liang et al. (1995) was used. The results from the two measurement methods compared well, indicating reliable air permeability values using the expression of Liang et al. for the soils studied. Air permeability in structured soil measured using exhumed samples of different size showed that small samples generally yielded lower values and higher variability in ka than large samples, in accordance with the concept of a representative elementary volume.
1 March 1998 in Soil Science
Accurate prediction of changes in the gas permeability during variable soil-moisture conditions is a prerequisite for improved simulation and design of soil-venting systems for removal of volatile organic chemicals in polluted soils. Air permeability, k, as a function of soil air-filled porosity, ∊, was measured on intact soil cores in a sandy forest soil from four depths with very different porosities and organic matter contents. The new data, together with 16 additional data sets for undisturbed soils, were used to evaluate several predictive models for relative gas permeability. A simplified Brooks & Corey model and a Millington & Quirk model gave similar and good predictions for sandy and loamy soils. A new soil type-dependent permeability model using the Campbell soil water retention parameter, b, to describe soil type effects gave an overall better description of relative gas permeability for all 20 soils. Both the previous and new gas permeability models require a reference point measurement of k at a relatively high air-filled porosity. However, based on measurements of both k and gas diffusion coefficients on the same undisturbed sandy and loamy soils, a simple relationship between absolute gas permeability and gas diffusivity was derived from a classical tortuous-tube gas flow model. This relation was combined with the recently presented PMQ model for predicting gas diffusivity (Soil Science 162:632-640) to obtain a new, conceptual model for absolute gas permeability as a function of soil type and airfilled porosity.
1 February 2011 in Bioresource Technology
3 June 2010 in Environmental Science & Technology