This study proposed the twin poly-Si fin field-effect transistor (FinFET) nonvolatile memory with a structure that is composed of Ω-gate nanowires (NWs). Experimental results show that the NW device has superior memory characteristics because its Ω-gate structure provides a large memory window and high program/erase efficiency. With respect to endurance and retention, the memory window can be maintained at 3.5 V after 104 program and erase cycles, and after 10 years, the charge is 47.7% of its initial value. This investigation explores its feasibility in the future active matrix liquid crystal display system-on-panel and three-dimensional stacked flash memory applications.
We propose the concept of the electrical junction in a junctionless (JL) field-effect-transistor (FET) to illustrate the transfer characteristics of the JL FET. In this work, nanowire (NW) junctionless poly-Si thin-film transistors are used to demonstrate this conception of the electrical junction. Though the dopant and the dosage of the source, of the drain, and of the channel are exactly the same in the JL FET, the transfer characteristics of the JL FET is similar to these of the conventional inversion-mode FET rather than these of a resistor, which is because of the electrical junction at the boundary of the gate and the drain in the JL FET. The electrical junction helps us to understand the JL FET, and also to explain the superior transfer characteristic of the JL FET with the gated raised S/D (Gout structure) which reveals low drain-induced-barrier-lowering (DIBL) and low breakdown voltage of ion impact ionization.
This work demonstrates a feasible single poly-Si gate-all-around (GAA) junctionless fin field-effect transistor (JL-FinFET) for use in one-time programming (OTP) nonvolatile memory (NVM) applications. The advantages of this device include the simplicity of its use and the ease with which it can be embedded in Si wafer, glass, and flexible substrates. This device exhibits excellent retention, with a memory window maintained 2 V after 104s. By extrapolation, 95% of the original charge can be stored for 10 years. In the future, this device will be applied to multi-layer Si ICs in fully functional systems on panels, active-matrix liquid-crystal displays, and three-dimensional (3D) stacked flash memory.