24 December 2024 in IEEE Transactions on Intelligent Transportation Systems
This study develops novel event triggered finite-time adaptive sliding-mode coordinated control method for networked hysteretic leaf spring suspension system subject to limited bandwidth, uncertainty sprung mass, dynamic constraints, and multiple control objectives. For inherent contradiction between body vibration and suspension chatter space, nonlinear filtering coordinated strategy with variable cut-off frequency is tailored to synthesize controlled variable composed of body and filtered tire displacements to realize smooth switch between hard and soft suspension under large/small suspension deformation. For the transmission congestion of control signals, event-triggered scheme relying on active force is designed to flexibly regulate command release interval to save communication resource and guarantee vibration suppression capability under abrupt road disturbance. To further improve convergence abilities of encapsulated variable and mitigate deterioration of performances from sparse control command, finite-time prescribed performance control is proposed to ensure transient and steady-state performance by accelerating convergence of controlled error to small region within preset time. For reconstructed active suspension system with unknown body weight, step control inputs with estimated weight are generated by employing event-based adaptive sliding-mode control to improve ride comfort and enhance handling properties. Additionally, global stability of networked active suspension system is proved by Lyapunov theory. Finally, the effectiveness and benefits of the proposed control method in real leaf spring suspension system are demonstrated by the simulation and hardware-in-the-loop tests.
1 November 2022 in IEEE Transactions on Reliability
Uncertainties widely exist in modeling parameters of industrial robots due to wear during service. These uncertainties are too small to be directly measured and may severely affect the positioning accuracy of end-effector through multi-stage propagation. An uncertainty inverse analysis method of positioning accuracy is proposed to identify uncertainty of typical structural parameters with the selected optimal position information. The Denavit–Hartenberg method is employed to establish the kinematic model. For the probability uncertainty of modeling parameters, the inverse analysis model, which reflects propagation mapping between uncertain variables and end-effector position response is obtained by first-order second-moment method. The partial-derivative information is used to improve calculation efficiency through removing low-contributing parameters. To further reduce measurement noise interference, orthogonal matching pursuit strategy is presented to search optimal sensor placement with the objectives of maximum coefficient modulus and minimum correlation, then pseudoinverse matrix method is employed to obtain the exact solution of identification equation. Finally, numerical simulation results for 6 degrees-of-freedom robots indicate that the proposed method with improved solution efficiency can accurately identify uncertainties of joint angles within the error 5% under large measurement errors.
1 May 2005 in Molecular Therapy
Li-li Zhao,1,2 Jin-fa Gu,2 Ai-wen Dong,2 Yan-hong Zhang,2 Ling-feng He,2 Jin-he Zhang,2 Yi-gang Wang,1 Zi-lai Zhang,2 Qi-jun Qian,1,4 Cheng Qian,1,3 Xin-yuan Liu,1,2