Zhejun Jin

Zhejun Jin

Auto-generated profile, based on publicly available information

Zhejun Jin

College of Electronics and Information, Qingdao University, Qingdao, China

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 September 2023 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
TLTian Liu
Tian Liu
LLLu Liu
Lu Liu
HCHongzhi Chen
Hongzhi Chen
HSHaoyuan Sun
Haoyuan Sun
ZJZhejun Jin
Zhejun Jin
ZSZhongsen Sun
Zhongsen Sun
A circularly polarized antenna base on the transparent conformal polarization-conversion metasurface is proposed. The designed meta-surface unit is an ellipse rotating 45 degrees with a rectangular slot. The three metasurface cells are arranged in a group and rotated 90 degrees around the feed antenna. The metasurface is printed on transparent and conformal PET while also possessing low-profile characteristics. By using this method, polarization conversion of the antenna is achieved without damaging the original antenna structure, thus extending the circular polarization bandwidth of the antenna. The simulated and measured results show that the -10 dB bandwidth of the antenna is 3.9-4.7 GHz, the axial ratio is less than 3 dB. The meta-surface effectively expands the circular polarization bandwidth of the antenna from 100 MHz to 800 MHz. The radiation efficiency of the antenna exceeds 60%, and the peak gain is more than 5 dBi. The radiation patterns show that the antenna has right-handed polarization characteristics and obvious directional radiation characteristics. The meta-surface design effectively broadens the circular polarization bandwidth of the antenna, making it suitable for circularly polarized communication systems operating in the C-band frequency range.

27 November 2024 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
HCHongzhi Chen
Hongzhi Chen
QZQiutong Zhen
Qiutong Zhen
JCJing Chen
Jing Chen
HSHaoyuan Sun
Haoyuan Sun
HLHaoran Li
Haoran Li
ZJZhejun Jin
Zhejun Jin
Transparent metasurface-loaded flexible antenna for the X-band. The dumbbell-shaped metasurface is a type of polarization conversion unit arranged in a checkerboard pattern. This structure achieves 10 dB Linear polarization radar crosssection(RCS) reduction under vertical incidence within the 9.2- 21.2 GHz range. Attach it to a slotted antenna array powered by a 1-to-4 Wilkinson power divider. The antenna has good radiation characteristics within the bandwidth of the X band. This antenna design boasts a low profile (0.14λ0), flexibility, and interference resistance. In the 0-90° central angle bending scenario, the structure maintains good RCS reduction and antenna radiation properties, while also effectively reducing electromagnetic waves at 0-45° angle, making it highly suitable for wider applications such as detection radar, satellite communications, and medical equipment.

14 October 2024 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
QZQiutong Zhen
Qiutong Zhen
ZMZhoutao Mao
Zhoutao Mao
HCHongzhi Chen
Hongzhi Chen
JCJing Chen
Jing Chen
LCLeonid F. Chernogor
Leonid F. Chernogor
TLTian Liu
Tian Liu
This letter presents a novel design for a transparent and flexible electromagnetic scatterer aimed at reducing radar cross-section (RCS). Made from low-resistance ITO thin film, PET, and PVC plastic, it achieves up to 81.3% transparency. Innovative unit design overcomes ITO's conductivity limitations and broadens bandwidth. Using the Pancharatnam-Berry phase principle, rotating the top-layer conductive structure creates encoded supercells. The letter explores RCS optimization using multiple algorithms, analyzes RCS changes in MSS with ITO patches in the conformal state, and compares the effects of ITO and copper on RCS performance. Multi-algorithm optimization results in over 10 dB RCS reduction from 8.5 to 19.8 GHz, even under 2π curvature or 45° oblique incidence. With a compact size (0.135 λ 0 ), transparency(81.3%), flexibility(central angle up to 2π), and wideband performance (80%), the scatterer is ideal for applications like multispectral scattering, antenna radomes, and transparent windows.

28 August 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
YCYangchao Chen
Yangchao Chen
LCLeonid F. Chernogor
Leonid F. Chernogor
Yu ZhengYu Zheng
Yu Zheng
ZJZhejun Jin
Zhejun Jin
ZSZhongsen Sun
Zhongsen Sun
TLTian Liu
Tian Liu
This letter presents a dual-band dual polarization (DP) antenna based on a cross-shaped metasurface with a terminal double-loop structure (TDLS) applied to 4G/5G base stations. The Fabry-Perot (FP) cavity is formed by introducing the TDLS metasurface above the dipole radiators, realizing the transition from single-band to dual-band and increasing the gain. After loading the TDLS metasurface, the DP antenna, whose total height is 0.46λ0 and planar reflector at the bottom is 0.77λ0×0.77λ0 (where λ0 is the wavelength at resonance point 2.3 GHz), realizes two broad bands of 2.05-2.55 GHz (21.74%) and 3.09-3.71 GHz (18.24%), reaching average gains of 8.86 dBi and 7.40 dBi respectively, which is about 3 dBi higher than that without metasurface, and has a stable radiation pattern. As well as, the 3-dB half-power beamwidth (HPBW) is stabilized at 63.5°±6.6°, and the isolation is more splendid than 30 dB. Eventually, the radiation efficiency stabilized at around 85%.

14 August 2024 in Flexible and Printed Electronics
Verified
Journal Article
Closed access
SLShilin Lian
Shilin Lian
HSHaoyuan Sun
Haoyuan Sun
HZHua Zhang
Hua Zhang
DZDan Zhang
Dan Zhang
TLTian Liu
Tian Liu
Yu ZhengYu Zheng
Yu Zheng
The article presents an innovative transparent, flexible antenna design tailored specifically for ultra-wideband multiple-input multiple-output (MIMO) systems. Using polyethylene terephthalate substrates as the base material, we enhance the antenna’s radiation performance, transparency, and flexibility. Broadband impedance matching is achieved through a hollow ground plane fed by a fish-tail radiator and coplanar waveguide. Additionally, significant MIMO antenna isolation in ultra-wideband scenarios is achieved through the vertical arrangement of units and neutral lines. The MIMO antennas we manufactured exhibit minimum transparencies of 71.1% and 85.9% with and without reflectors, respectively. Measurement results demonstrate that the antenna operates within the 3–20 GHz frequency range, with over 24 dB of isolation, 2 ± 2 dBi of peak gain, and 45% ± 5% of radiation efficiency, suitable for applications in wearable devices, vehicle intelligence, and other fields.

19 December 2024 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
XLXiaoxu Liu
Xiaoxu Liu
ZJZhihao Jiang
Zhihao Jiang
SZShipeng Zhang
Shipeng Zhang
QGQuanming Gao
Quanming Gao
ZYZhao Yao
Zhao Yao
Shandong LiShandong Li
Shandong Li
Magneto-electric coupled sensors are a new type of magneto-mechanical-electrical based sensors for weak magnetic (0-100 Hz, less than 100 nT) measurements. In practical applications, sensor performance parameters such as sensitivity, noise and detection limit affect the test results. In this paper, the ferroelectric hysteresis loop of the piezoelectric material (PZT) and the hysteresis curve of the magnetostrictive material (Metglas) were first tested. Two magneto-electric sensors with the same dimensions and similar resonance conditions were then connected in series, and the measurements showed a large improvement in the performance of the sensors. It is found that the series-connected sensor reduces the equivalent magnetic noise (EMN) from 6 pT/Hz 1/2 to 3.4 pT/Hz 1/2 with no change in the inflection point of the low-frequency 1/f spectrum, and the performance is improved by 44%. The magneto-electric coupling effect is more obvious after the series connection, the magneto-electric coupling coefficient α ME =333.15 V/cm·Oe, the detection limit can be as low as 60 pT, and the sensitivity of the series sensor is improved from 115 pT to 76 pT, which improves the performance by 33%. Finally, the forced vibration of the electrical signal when the sensors are connected in series is investigated.