This letter presents a dual-band dual polarization (DP) antenna based on a cross-shaped metasurface with a terminal double-loop structure (TDLS) applied to 4G/5G base stations. The Fabry-Perot (FP) cavity is formed by introducing the TDLS metasurface above the dipole radiators, realizing the transition from single-band to dual-band and increasing the gain. After loading the TDLS metasurface, the DP antenna, whose total height is 0.46λ0 and planar reflector at the bottom is 0.77λ0×0.77λ0 (where λ0 is the wavelength at resonance point 2.3 GHz), realizes two broad bands of 2.05-2.55 GHz (21.74%) and 3.09-3.71 GHz (18.24%), reaching average gains of 8.86 dBi and 7.40 dBi respectively, which is about 3 dBi higher than that without metasurface, and has a stable radiation pattern. As well as, the 3-dB half-power beamwidth (HPBW) is stabilized at 63.5°±6.6°, and the isolation is more splendid than 30 dB. Eventually, the radiation efficiency stabilized at around 85%.
On-chip electrostatic discharge (ESD) protection poses a challenge in the chip fabrication process. In this study, a novel electric fuse (E-fuse) device featuring a simple structure of Ni metal on a SiO2 dielectric for ESD protection was proposed, and the physical mechanism of its operation was investigated in detail. Experimental evaluations, utilizing transmission line pulse (TLP) testing and fusing performance analyses, reveal that the E-fuse, constructed with a Ni metal layer measuring 5 μm in width, 100 μm in length, and 5 nm in thickness, achieved a significant ESD protection voltage of 251 V (VHBM) and demonstrates low-voltage fusing at a bias voltage of 7 V. Compared to traditional ESD protection devices, the E-fuse boasts a smaller size and removability. To assess fusing performance, devices of varying sizes were tested using a fusing lifetime model. This study supports both theoretical and empirical evidence, enabling the adoption of cost-effective, straightforward E-fuse devices for ESD protection.