24 November 2014 in IEEE Transactions on Applied Superconductivity
Inductive fault current limiters, such as saturated cores topology, have been considered as an enabling technology for the advent of modern power grids. Thereby, several full-scale prototypes have been developed in recent years aiming, e.g., supporting increased penetration of dispersed generation, mostly from renewable sources. For the advent of these devices and technology, the development of straightforward design tools that allow simulating them in electrical power grids with different voltage ratings and characteristics is required. In this paper, a methodology for simulating the behavior of saturated cores limiters is presented as an alternative to techniques based on finite elements methods (FEM), thereby dramatically reducing computation time. This methodology is based on characteristic parameters of those limiters and is compared with FEM simulations. Experimental measurements in a laboratory scale prototype are also carried out to validate the proposed methodology.
13 June 2005 in IEEE Transactions on Applied Superconductivity
As part of the design of small axial-flux induction motors using disk-shaped rotors made from YBCO bulks, in previous work we studied the behavior of such disks under a rotating 2-pole magnetic field and gave an explanation of the results. That work yields information on such internal parameters as pinning forces and pull-out torque, and good estimates of the damping and Magnus coefficients. As in conventional motors, one expects to find dependence of these parameters on the magnetic field speed-the synchronous speed. In the present work, this dependence is studied and the previous model is improved.
1 November 2003 in Physica C: Superconductivity and its Applications
11 December 2012 in IEEE Transactions on Applied Superconductivity
Superconducting magnetic energy storage (SMES) is characterized by low-energy density but high-power density, making this an unfeasible approach for bulk energy storage. Nevertheless, there are applications where high amounts of power must be available for a short period of time, like power quality applications. The core element of SMES is the superconducting coil. Different approaches are found in the literature considering the modeling of this component, either for design or simulation purposes. These usually consist of analytical or numerical approaches. The former allows fast results, but only considers geometric effects. The latter provides accurate results, considering, besides electromagnetic, also mechanical and thermal effects. In this paper, a review of these models is performed, and analytical models are used in an algorithm that allows optimizing equivalent inductance for a specified length of tape. Two small prototypes are fabricated, and experimental measurements carried out, in order to validate the models that are in the base of the proposed algorithm.
20 December 2012 in IEEE Transactions on Applied Superconductivity
The sand pile model, in conjunction with Bean model, is often applied to describe single grain bulk superconductors. However, in several applications such as electric motors, multiseeded bulks are needed, due to the need to increase sample dimensions. In this paper, an extension of the sand pile model is presented in order to manage this type of materials. Multiseeded HTS bulk superconductors, produced, e.g., by the top-seeded melt growth process, are characterized by intra- and intergrain currents, and these are reflected in the model. However, identifying these currents from flux density measurements is not straightforward, when considering more than one grain. In fact, the number of currents increases with the number of grains, and these have to be identified from the measured field surface. A method to identify these currents based on genetic algorithms is validated with artificial data and then used in real measurements.