Nuno Amaro

Prof. Nuno Amaro

Electrical Engineering, NOVA School of Science and Technology, NOVA University Lisbon, Caparica, Portugal
orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 February 2021 in Energies
Verified
Journal Article
Open access
PDF file
Gianluigi MigliavaccaGianluigi Migliavacca
Gianluigi Migliavacca
MRMarco Rossi
Marco Rossi
DSDario Siface
Dario Siface
MMMatteo Marzoli
Matteo Marzoli
HEHakan Ergun
Hakan Ergun
AMAndrei Morch
Andrei Morch
The FlexPlan Horizon2020 project aims at establishing a new grid-planning methodology which considers the opportunity to introduce new storage and flexibility resources in electricity transmission and distribution grids as an alternative to building new grid elements, in accordance with the intentions of the Clean Energy for all Europeans regulatory package of the European Commission. FlexPlan creates a new innovative grid-planning tool whose ambition is to go beyond the state of the art of planning methodologies by including the following innovative features: assessment of the best planning strategy by analysing in one shot a high number of candidate expansion options provided by a pre-processor tool, simultaneous mid- and long-term planning assessment over three grid years (2030, 2040, 2050), incorporation of a full range of cost–benefit analysis criteria into the target function, integrated transmission distribution planning, embedded environmental analysis (air quality, carbon footprint, landscape constraints), probabilistic contingency methodologies in replacement of the traditional N-1 criterion, application of numerical decomposition techniques to reduce calculation efforts and analysis of variability of yearly renewable energy sources (RES) and load time series through a Monte Carlo process. Six regional cases covering nearly the whole European continent are developed in order to cast a view on grid planning in Europe till 2050. FlexPlan will end up formulating guidelines for regulators and planning offices of system operators by indicating to what extent system flexibility can contribute to reducing overall system costs (operational + investment) yet maintaining current system security levels and which regulatory provisions could foster such process. This paper provides a complete description of the modelling features of the planning tool and pre-processor and provides the first results of their application in small-scale scenarios.

8 December 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
MAMarcelo Amaral
Marcelo Amaral
NANuno Amaro
Nuno Amaro
PAPedro Arsénio
Pedro Arsénio
Maritime ports represent an important ecosystem for pollutant emissions and, considering the ongoing energy transition, need to adopt new solutions to mitigate current emission levels. These emissions are partially avoidable if ships and vessels docked at the port use electric energy to feed their power needs instead of using their internal combustion engines. In Europe, there is an ongoing discussion on including such emissions in the European Union Emissions Trading System, which will represent added costs for maritime operators. Onshore power supply systems can contribute to the ongoing energy transition by allowing the use of electric power to feed docked ships. As a first step to contribute to the development of onshore power supply solutions, it is necessary to evaluate the added power needs that these systems would represent for the port. This paper presents a methodology that allows port operators to verify, straightforwardly and transparently, their power needs for onshore power supply applications. The methodology is based on the historical data of docked ships at the port or quay level and provides an energy analysis of each type of vessel to determine the power to be installed at the port so that it is possible to supply energy to different types of ships and vessels simultaneously. Additionally, the implemented methodology provides economic and technical decision support factors by comparing the fuel costs with electric power costs, assessing the potential for this transition to onshore power supply. The methodology is validated using a real case study for the Port of Lisbon, and obtained results demonstrate the potential for the installation of an onshore power supply in medium- to large-dimension maritime ports.

11 December 2012 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
NANuno Amaro
Nuno Amaro
JMJoão Murta-Pina
João Murta-Pina
Joao MartinsJoao Martins
Joao Martins
JCJ. M. Ceballos
J. M. Ceballos
AÁA. Álvarez
A. Álvarez
Superconducting magnetic energy storage (SMES) is characterized by low-energy density but high-power density, making this an unfeasible approach for bulk energy storage. Nevertheless, there are applications where high amounts of power must be available for a short period of time, like power quality applications. The core element of SMES is the superconducting coil. Different approaches are found in the literature considering the modeling of this component, either for design or simulation purposes. These usually consist of analytical or numerical approaches. The former allows fast results, but only considers geometric effects. The latter provides accurate results, considering, besides electromagnetic, also mechanical and thermal effects. In this paper, a review of these models is performed, and analytical models are used in an algorithm that allows optimizing equivalent inductance for a specified length of tape. Two small prototypes are fabricated, and experimental measurements carried out, in order to validate the models that are in the base of the proposed algorithm.


24 November 2014 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
NANuno Amaro
Nuno Amaro
JSJan Souc
Jan Souc
JMJoão Murta-Pina
João Murta-Pina
Joao MartinsJoao Martins
Joao Martins
JCJose Maria Ceballos
Jose Maria Ceballos
FGFedor Gömöry
Fedor Gömöry
Measurements of ac losses in high-temperature superconducting (HTS) coils are of utmost importance for power applications because these are one of the most limiting factors in superconducting devices. There are two possible ways to measure such losses: calorimetric and electromagnetic methods. An electromagnetic method using a contactless loop is reported in this paper. To verify the applicability of such method in medium- to large-sized coils, two different contactless loops were designed and built, and results are compared with those obtained from measurements made with different configurations of voltage taps. All tests were performed at 77 K, using a superconducting coil with a variable number of turns (up to a maximum of 128) wound from BSCCO tape. Currents ranging from zero to the critical value were applied, at frequencies from 72 to 1152 Hz.

Verified
Journal Article
Open access
PDF file
NANuno Amaro
Nuno Amaro
AEAleksandr Egorov
Aleksandr Egorov
GGGonçalo Glória
Gonçalo Glória
Floating offshore wind energy is one of the solutions that can foster the ongoing climate transition in Europe. The ARCWIND project aims to contribute to this topic by considering multiple research activities designed to contribute to the development of multiple floating technologies, identifying high-potential deployment areas while considering their economic viability and the impact that these would have in existing power systems. Regarding the latter activity, a two-step methodology was implemented to first calculate the nodal capacity that existing electricity networks have to absorb energy from these potential new wind farms and secondly to assess the impact at the point of connection. This assessment is performed by identifying grid reinforcement needs, verifying the impact on short circuit current levels and measuring the impact on the existing energy mix at countrywide level. This article includes the description of this methodology as well as its application to six different use cases covering five European countries: Portugal, Spain, France, the United Kingdom, and Ireland. Results obtained seem to indicate that, in most cases, the current power systems have enough capacity for the possible connection of new floating offshore wind farms without major reinforcement needs and that these wind farms can have a major contribution to the countries’ energy mix and to the achievement of established climate targets.