16 February 2021 in IEEE Access
Grasping and manipulating objects on a microscale hold great promise, especially using mechanical structures made from soft materials that enable, for example, safe operations during microsurgery. Soft robots should be preferred to manipulate micro-objects, but their adoption requires, inter alia, soft transducers that can operate either in air or in solution. Ultimately, they should enable actuation at low voltage, as well as be easy to fabricate. This paper presents the results on our investigations about conducting polymers -based transducers. We demonstrate that this material is suitable to construct sensitive structures and a microgripper is proposed to illustrate the results. Large strains were observed and a grasping force of 0.17 mN was generated. Moreover, compared to previous work, we show that the fabrication process can be downscaled while preserving the behavior of the material in both actuation and sensing modes. The macroscale mechanical models obtained are still valid for microscale actuation and sensing.
23 July 2020 in Smart Materials and Structures
The demand for polymer-based soft micro-electro-mechanical systems (MEMS) is growing due to the substantial increase of flexible and wearable electronic devices. In this context, electronically conducting polymers (ECPs) fulfil the requirements for soft MEMS by offering the possibility of actuation and sensing, however, their miniaturization, their integration attempts and their resulting performances are still limiting their use in real applications. In this work, elaboration, integration and operation of soft and efficient microtransducers based on commercially available poly(3,4-ethyledioxythiophene):poly(styrene sulfonate) conductive ink into flexible chips is demonstrated. This original process overcomes existing hurdles to the fabrication of fully integrated ECP-based devices with gold remote contacts directly in contact with ECPs and further embedding in flexible support. These batch-fabricated chips are actuated at low voltage (±3.0 V) in open-air with individual accessible electrical connections. More importantly, the mechanical strain sensing is evidenced for the first time on such small ECP-based devices after full integration and demonstrating low impact of the microfabrication process. This work opens the way for further development of soft ECP-MEMS and integration into more complex systems with possible applications in microrobotics, microfluidics, optoelectronics, biology, medicine or space.