Poor wettability of solder paste on printed copper (Cu) surfaces presents a significant limitation towards the reliable assembly of flexible hybrid electronic (FHE) circuits. This work addresses this challenge using a low-melting-point, bismuth-based solder on nanoparticle-based copper ink pads serigraphically printed on flexible polyimide. To improve solderability, we introduce a surface treatment involving mechanical polishing of the printed copper with sodium bicarbonate (NaHCO [t]3 ) to reduce surface porosity and remove organic residues. This treatment enhanced solder wettability by 66%, leading to superior component alignment and assembly quality. The fabricated circuits prove highly robust and withstand a 1000 h accelerated aging test at 85 ∘ C and 85% relative humidity. Cross-sectional analysis confirms formation of a m thick intermetallic layer, indicative of an industrial-quality FHE circuit.