A novel tapered plastic optic fiber (POF) biosensor is proposed and demonstrated for monitoring limonene in different concentrations. The mechanism of this device is based on an increase in the light transmission of a sensor submerged in a higher-concentration limonene solution, which also reflects an increase in the refractive index of the sensor. The tapered POF was fabricated using the chemical etching method to accomplish different waist diameters of 0.6 mm, 0.55 mm, and 0.5 mm, with a fiber length of 10 cm and a 2 cm sensing region. An Arduino integrated development environment (IDE) program was used to drive the voltage values from the photodetectors to obtain the measurements. As the limonene concentration solution varied from 20% to 100%, the output voltage of the sensor increased linearly, showing a sensitivity of 0.295 V/%, 0.33 V/%, and 0.46 V/% for tapered waist diameters of 0.6 mm, 0.55 mm, and 0.5 mm, respectively. The proposed sensor is a low-cost solution measurement option with high sensitivity, while it also involves a simple and easy fabrication technique.
1 December 2024 in Bulletin of Electrical Engineering and Informatics
The study proposes a novel approach for detecting adulteration in edible oils utilising a zinc oxide (ZnO)-coated optical sensor. The procedure included the development of a sensor probe using a plastic optical fiber (POF) with a ZnO nanolayer deposition. The ZnO nanorods were applied to the surface of the POF via a hydrothermal process. The sensitivity and accuracy of uncoated and ZnO-coated POFs were compared, and it was discovered that the ZnO-coated POF was more sensitive to changes in the refractive index of the samples under testing. The study ascertained a correlation between the optical power and voltage of the sensor and the refractive index of the medium. As the adulterant concentration in the oil mixture increased, the refractive index of the medium altered. As a result, both the sensor’s output voltage and optical power decreased. Upon completion, it was discovered that the uncoated POF had a sensitivity of 0.073 V/%, whereas the ZnO-coated POF had a sensitivity of 0.085 V/%. These findings highlight the effectiveness of ZnO-coated optical sensors, as well as their potential integration into internet of things (IoT) platforms for monitoring adulteration in edible oils.
1 October 2025 in Bulletin of Electrical Engineering and Informatics
Recent interest in water level detection is driven by the need for accurate monitoring in sectors such as agriculture, flood management, and environmental conservation. The measuring of liquid levels and solution concentrations is critical in a variety of industrial sectors. This research is to design, implement, and test the use of plastic optical fiber (POF) as an optical sensor for sensing multi-point liquid levels and densities. The developed device includes a multi-point liquid level sensor that uses refractive index modification of macro bend POFs selectively twisted around a cylindrical column. When the POFs were submerged in various mediums such as pure water, seawater, saltwater, and cooking oil, a set of U-shaped detecting heads was designed to detect changes in liquid levels. The experimental setup included an 850 nm optical light source and a power meter to measure the output power. A comparison of the performance of straight, bent, and twisted POF forms revealed that the twisted and bent POF topologies attained a sensitivity of 30%, exceeding bending-only 21% and twisting-only 12% configurations. In summary, changes in liquid levels resulted in an increase in output power for all liquid media, highlighting the potential of POF as a reliable sensor for sensing liquid levels.