15 April 2020 in Science Robotics
Ladybird beetle–inspired origami uses the deformation and geometry of its facet to enable unique energy storage and self-locking.
27 March 2019 in IEEE/ASME Transactions on Mechatronics
In this paper, we present a milli-scale integrated jumping-crawling robot that can adjust its launch trajectory and upright itself. This multi-modal robot shows an enhanced performance of overcoming obstacles compared to a robot with a single locomotion mode. To make this possible, the robot uses a newly developed jumping module with improved energy storing-capacity and a height-adjustable active clutch. The jumping module utilizes both linear springs and torsional springs to maximize the energy-storing capacity under the given limit of structural robustness. To adjust the quantity of stored energy and release the energy at any state, an active clutch mechanism based on a single DC motor is developed, which enables the robot to control both jump timing and height. Also, an active shell allows the robot to upright itself after landing and to continue jumping-crawling. The jumping module and the shell are integrated with the lightweight VelociRoACH crawler. To show the usability in real-world applications, the integrated jumping-crawling robot is tested on the cluttered terrain. In result, the robot reaches a target using jumping, crawling, and self-righting.
29 December 2023 in Intelligent Service Robotics
17 July 2020 in IEEE Robotics and Automation Letters
The CaseCrawler is a lightweight and low-profile movable platform with a high payload capacity; it is capable of crawling around carrying a smartphone. The body of the robot resembles a phone case but it has crawling legs stored in its back. It is designed with a deployable, in-plane transmission that is capable of crawling locomotion. The CaseCrawler's leg structure has a knee joint that can passively bend only in one direction; this allows it to sustain a load in the other direction. This anisotropic leg allows a crank slider to be used as the main transmission for generating the crawling motion; the crank slider generates a motion only within a 2D plane. The crank slider deploys the leg when the slider is pushed and retracts it when pulled; this enables a low-profile case that can fully retract the legs flat. Furthermore, by being restricted to swinging within a plane, the hip joint is highly resistant to off-axis deformation, this results in a high payload capacity. As a result, the CaseCrawler has a body thickness of 16mm (the transmission without the gearbox is only 1.5mm) and a total weight of 22.7g; however, it can carry a load of over 300g, which is 13 times its own weight. To show the feasibility of the robot for use in real-world applications, in this study, the CaseCrawler was employed as a movable platform that carries a 190g mass, including a smartphone and its cover. This robot can crawl around with the smartphone to enable the phone to charge itself on a wireless charging station. In the future, if appropriate sensing and control functions are implemented, the robot will be able to collect data or return to the owner when needed.
30 November 2019 in Journal of Korea Robotics Society
1 September 2023 in Journal of Korea Robotics Society