15 April 2019 in IEEE Transactions on Geoscience and Remote Sensing
The design of the Moderate-Resolution Imaging Spectroradiometer (MODIS) instrument was driven by the scientific community's desire to have near-daily global coverage at moderate resolution (~ 1 km) with comprehensive spectral coverage from visible to long-wave infrared wavelengths. Since their launches in 1999 and 2002, respectively, the Terra and Aqua MODIS instruments have made continuous global observations and generated numerous data products to help users worldwide with their studies of the Earth's system and its short- and long-term changes. The 20 reflective solar bands (RSBs) with wavelengths from 0.41 to 2.2 μm collect data at three nadir spatial resolutions: 250 m, 500 m, and 1 km. The solar diffuser (SD) coupled with the SD stability monitor (SDSM) provides a reflectance-based calibration on-orbit. In addition, lunar observations and response trends from pseudoinvariant desert sites are used to characterize the response versus scan-angle changes on-orbit. This paper provides a brief overview of MODIS RSB calibration algorithms, as implemented in the latest Level 1B version 6.1, operational activities, on-orbit performance, remaining challenges, and potential improvements. Results from the SD and SDSM measurements show a wavelength and mirror-side-dependent degradation in RSB responses, with the largest degradation at the shortest wavelengths, particularly for Terra MODIS. Aqua MODIS has experienced far less degradation of its optics and on-board calibrators compared with Terra MODIS, resulting in an overall better performance. With the exception of Aqua band 6, there have been no new noisy or inoperable detectors in the RSB of either instrument during postlaunch operations. As the instruments age and continue to endure the space environment, the detectors and the optical systems degrade. The challenges associated with incorporating these on-orbit changes to ensure a production of high-quality calibrated L1B data products are also discussed in this paper.
18 September 2017 in IEEE Transactions on Geoscience and Remote Sensing
Moderate Resolution Imaging Spectroradiometer (MODIS) reflective solar bands (RSBs) are calibrated on-orbit using a solar diffuser (SD) with its degradation tracked by an onboard SD stability monitor (SDSM). The SDSM has nine detectors with wavelengths from 0.41 to 0.94 μm. It is operated during each scheduled SD calibration event, making alternate observations of the sun and the SD. Due to erroneous design parameters, which led to the misalignment of the key elements in the SDSM, there are significant ripples in the sun view responses as the solar viewing angle changes. At the mission beginning, the effect of the ripples was eliminated by normalizing each SDSM detector response to the response of detector 9 (D9) at 0.94 μm, assuming that D9 had no degradation. However, D9 degradation increases over MODIS operation times. Degradation of up to 2% has recently been observed in D9 for the Terra MODIS. A newly implemented approach reduces the sun view ripples using a lookup table constructed using SDSM data carefully selected from a short period early in the mission lifetime. In this paper, we provide an overview of different approaches that have been applied over the years by the MODIS Characterization Support Team to track the on-orbit SD degradation. We evaluate the overall SD and SDSM on-orbit performance for both Terra and Aqua MODIS, as well as the impact on the MODIS RSB calibration uncertainty.