In this study, we experimentally and theoretically demonstrated a universal pathway of hysteresis evolution in polarization switching cycling in both antiferroelectric (AFE) and ferroelectric (FE) Hf x Zr 1-x O 2 (HZO) thin films. AFE films can achieve sufficient remnant polarization and high endurance by engineering the evolution process of double hysteresis merge. Based on this, we propose a new strategy for realizing high-endurance AFE films in non-volatile memory devices. Additionally, a record high endurance >10 12 on 6 nm AFE HZO under full polarization switching conditions at 4.5 MV/cm and 1 MHz is achieved to demonstrate the potential of this strategy.
The Hf x Zr 1-x O 2 (HZO) based ferroelectric field-effect transistors (FeFETs) with oxide semiconductor channel have been proposed to have the potential of interface layer (IL) free, but the FeFET properties with real IL-free structure has rarely been demonstrated. In this work, we experimentally and theoretically clarified that real IL-free FeFET with ferroelectric (FE) HZO as gate oxide is difficult to get memory window (MW) because the polarization switching is difficult to occur due to insufficient positive charge compensation from oxide channel. In addition, we demonstrate that IL-free FeFETs with antiferroelectric (AFE) HZO provides a solution to get MW through positive subloop which does not require positive charge compensation in polarization changing. And an endurance performance up to 10 9 cycles is achieved in this FeFET structure. Our results provide new insights into engineering of HZO-based FeFET with oxide channel.
Memcapacitor devices based on ferroelectric material have attracted attention recently in application of neuromorphic computing due to lower static power relative to memristors. They have been used for establishing fully connected neural networks but not yet for recurrent neural networks (RNNs), which owns the advantage in temporal signal processing. As an improved network architecture for RNNs, reservoir computing (RC) is easier to train and energy efficient. In this work, an HZO-based ferroelectric memcapacitor is used as the reservoir layer to recognize handwritten digits. A recognition accuracy of 90.3% is achieved. Meanwhile, a task of predicting Mackey–Glass time series is built to demonstrate the advantage of reservoir networks in processing time-series signals. A normalized root mean square error of 0.13 was obtained, indicating that this system can predict the Mackey–Glass chaotic system well. In addition, the energy consumption in the input signal and recognition task is significantly lowered compared with a memristor-based network. Our work provides an energy efficient way to build up the RC network.
The measurement of ferroelectric (FE) polarization switching time was known to be strongly related with RC delay, but this phenomenon has not been fully understood, as several kinds of RC effects may be involved extrinsically and/or intrinsically. In this work, by carefully excluding the extrinsic RC charging effects before and in polarization switching, we experimentally and theoretically demonstrate an intrinsic RC effect coupled in polarization switching dynamics of Hf 0.5 Zr 0.5 O 2 (HZO) FE capacitor. We found that such an intrinsic RC effect not only dominantly determine the switching time under high electric field but also significantly affect it under low field. And, a mechanism is proposed that a RC re-charging is coupled with each domain flipping in multiple domain FE system, so that the switching time is unavoidably and intrinsically affected by this coupling effect. Thus, our results provide critical messages to the speed evaluation and integrated circuit design of FE devices.
24 August 2022 in IEEE Transactions on Electron Devices
Negative capacitance (NC) effects in ferroelectric (FE) films have attracted intensive attention recently in terms of both polarization kinetics modeling and low-power CMOS applications. Its physical origin, however, is controversial because the experimentally observed NC effects are different from the initial concept, particularly on the frequency/voltage dependence and hysteresis. Recently, we have proposed an electrostatic model, with which the NC effect with hysteresis and voltage dependence in FE/paraelectric (PE) stacks in dc mode is explained from a viewpoint of polarization switching. Based on this, in this work, the NC effect in the dimension of time in both FE/PE and FE capacitor–resistor (FE-R) circuit is analytically formulated and experimentally studied by comprehensively considering the dynamics of polarization switching, charge communication with power supply, and charge leaking through the capacitor. Our results suggest that such NC effects only occur in a time window in both systems and a competition between FE switching and charge compensation is the key to determine the time window. Thus, a systematic understanding is accomplished to explain most of the phenomenon associated with NC effects in FEs.
27 January 2026 in IEEE Transactions on Electron Devices
A low process temperature and a large memory window (MW) in ferroelectric field-effect transistors (FeFETs) based on Hf${}_{x}$ Zr${}_{{1}-{x}}$ O2 (HZO) ferroelectric (FE) layers and oxide semiconductors are strongly required for back-end-of-line (BEOL) applications. However, conventional low-temperature fabrication approaches typically involve high costs and complex processing steps, which significantly hinder their practicality for large-scale manufacturing. This work demonstrates an annealing-free HZO FE thin-film capacitor and an oxide-semiconductor-based FeFET fabricated at an ultralow process temperature of $250~^{\circ }$ C. A remanent polarization ($2{P} _{r}$ ) of $17.4~\mu $ C/cm2 is achieved in the annealing-free HZO film, benefiting from: 1) the introduction of ZrO2 seed layers on both sides of the HZO film; 2) careful optimization of the ZrO2 and HZO layer thicknesses; and 3) slow atomic layer deposition (ALD)-driven crystallization at $250~^{\circ }$ C. Furthermore, by employing a metal-FE-metal-insulator-semiconductor (MFMIS) device structure and engineering the interfacial properties, an annealing-free FeFET exhibiting a MW of approximately 1.9V and an endurance exceeding $10^{{7}}$ cycles is achieved. Overall, this work establishes a new paradigm that integrates ALD-driven crystallization with device structure optimization, enabling low-cost, high-reliability, and BEOL-compatible FE memory technologies.