In this work, we demonstrate indium–gallium–zinc oxide (IGZO) transistors fabricated on an 8-in wafer with high uniformity, steep subthreshold slope, and high reliability under positive bias temperature instability (PBTI) stress. The impact of channel compositions, gate dielectrics, and post-treatment conditions on PBTI degradation is systematically characterized and analyzed. The negative threshold voltage ( ${V}_{\text {TH}}{)}$ shift under positive stress is found to be determined by both hydrogen (H) and oxygen vacancy ( $\text{V}_{\text {O}}{)}$ , which is the dominating factor with the highest time exponent in PBTI of IGZO transistors. By reducing H concentration and suppressing $\text{V}_{\text {O}}$ generation by process engineering in gate-stack, semiconductor channel, and post-treatment condition, IGZO transistors with high PBTI reliability are demonstrated, achieving a low $\vert \Delta {V}_{\text {TH}}\vert $ of 11 mV at 95 °C, ${V}_{\text {stress}}$ of 3 V ( ${t}_{\text {ox}}$ = 7 nm, EOT = 3.2 nm by ${C}$ – ${V}$ measurements, and ${E}_{\text {OX}}$ of 3.7 MV/cm), and ${t}_{\text {stress}}$ of 2 ks.
In this study, the temperature behavior of a silicon ring resonator is experimentally investigated for cryogenics. The ring resonator shows a linear sensitivity of 63.9 pm/K in the temperature range from 180 to 300 K. And the experimental results agree well with the simulated data. The response time of the sensor is investigated by thermal analysis and a fast response of 325 ms is experimentally achieved. In addition, the developed sensor shows high performance in repeatability and stability. Based on our work, for the first time, silicon-based ring resonators are applied to cryogenic temperature sensing with the prominent advantages of compactness, chip-scale integration and complementary metal oxide-semiconductor (CMOS) compatibility. This work proves that silicon ring resonators are a potential platform for cryogenic monitoring.
The Hf x Zr 1-x O 2 (HZO) based ferroelectric field-effect transistors (FeFETs) with oxide semiconductor channel have been proposed to have the potential of interface layer (IL) free, but the FeFET properties with real IL-free structure has rarely been demonstrated. In this work, we experimentally and theoretically clarified that real IL-free FeFET with ferroelectric (FE) HZO as gate oxide is difficult to get memory window (MW) because the polarization switching is difficult to occur due to insufficient positive charge compensation from oxide channel. In addition, we demonstrate that IL-free FeFETs with antiferroelectric (AFE) HZO provides a solution to get MW through positive subloop which does not require positive charge compensation in polarization changing. And an endurance performance up to 10 9 cycles is achieved in this FeFET structure. Our results provide new insights into engineering of HZO-based FeFET with oxide channel.
The polarization of HfO2-based ferroelectrics originates from the metastable orthorhombic phase formed during the tetragonal to monoclinic phase transition and is typically controlled by tuning the phase content. However, another way to control polarization via modulating ferroelectric domain orientations remains underexplored. This work uncovers a hidden tetragonal-orthorhombic phase transition pathway to engineer domain orientations and further polarization in polycrystalline Hf0.5Zr0.5O2 using single-crystalline TiN substrates. Specifically, (001)O and/or (010)O domains, which fully contribute to remanent polarization under an electric field, are controllable in Hf0.5Zr0.5O2 on TiN (001) and (111), enhancing remanent polarization compared to that on TiN (110). The key is the hidden transition from the tetragonal phase’s longest c-axis to the orthorhombic phase’s shorter bO/cO-axis, alongside the reported one to the longest aO-axis, assisted by periodic dislocations at the TiN/Hf0.5Zr0.5O2 interface. These findings shed light on governing the polarization of Hf0.5Zr0.5O2 films by controlling the interface dislocations and further domain orientations.
Memcapacitor devices based on ferroelectric material have attracted attention recently in application of neuromorphic computing due to lower static power relative to memristors. They have been used for establishing fully connected neural networks but not yet for recurrent neural networks (RNNs), which owns the advantage in temporal signal processing. As an improved network architecture for RNNs, reservoir computing (RC) is easier to train and energy efficient. In this work, an HZO-based ferroelectric memcapacitor is used as the reservoir layer to recognize handwritten digits. A recognition accuracy of 90.3% is achieved. Meanwhile, a task of predicting Mackey–Glass time series is built to demonstrate the advantage of reservoir networks in processing time-series signals. A normalized root mean square error of 0.13 was obtained, indicating that this system can predict the Mackey–Glass chaotic system well. In addition, the energy consumption in the input signal and recognition task is significantly lowered compared with a memristor-based network. Our work provides an energy efficient way to build up the RC network.
Negative capacitance (NC) effects in ferroelectric/paraelectric (FE/PE) stacks have been recently discussed intensively in terms of the steep subthreshold swing (SS) in field-effect transistors (FETs). It is, however, still disputable to stabilize quasi-static-NC effects. In this work, stepwise internal potential jumps in a metal/FE/metal/PE/metal system observed near the coercive voltage of the FE layer are reported through carefully designed DC measurements. The relationship of the internal potential jumps with the steep SS in FETs is also experimentally confirmed by connecting a FE capacitor to a simple metal-oxide-semiconductor FET. On the basis of the experimental results, the observed internal potential jumps are analytically modelled from the viewpoint of bound charge emission associated with each domain flip in a multiple-domain FE layer in a FE/PE stack. This view is different from the original NC concept and should be employed for characterizing FE/PE gate stack FETs.