The issue of modeling and fault-tolerant control (FTC) design for a class of flexible air-breathing hypersonic vehicles (FAHVs) with actuator faults is investigated in this article. Different from previous research, the shear deformation of the fuselage is considered, and an ordinary differential equations-partial differential equations (ODEs-PDEs) coupled model is established for the FAHVs. A feedback control is proposed to ensure flight stable and an adaptive FTC method is designed to deal with actuator faults while suppressing the system’s vibrations. Besides, the stability analysis of the closed-loop system is given via the Lyapunov direct method and an algorithm that transfers the bilinear matrix inequalities (BMIs) feasibility problem to the linear matrix inequalities (LMIs) feasibility problem is provided for determining the control gains. Finally, the numerical simulation results show that the proposed controller can stabilize the flight states and suppresses the vibration of the fuselage efficiently.
6 January 2022 in IEEE Transactions on Industrial Electronics
This article addresses a novel adaptive compensation strategy for a flexible manipulator in the presence of unmodeled system dynamics and an infinite number of time-varying actuator faults. Differing from the existing results, the unmodeled system dynamics are represented by a nonlinear time-varying delay function, which is tackled with the aid of neural network technique and Lyapunov–Krasovskii function. By introducing the projection technique and a piecewise Lyapunov function, a fault-tolerant control method is proposed, the uniformly ultimate boundedness of the closed-loop system is ensured, and the number of actuator faults is allowed to be infinite. Simulation and physical experiment results show that the manipulator can track the desired angle and the vibration can be suppressed effectively under the proposed scheme for the system with uncertainties and actuator faults.
9 October 2023 in IEEE Transactions on Cybernetics
The leader-following cooperative problem in heterogeneous multiagent systems (HMASs) with unmodeled dynamics and actuator faults is investigated in this article. The HMASs, which include unmanned ground vehicles and unmanned aerial vehicles, are first described using a fully actuated system model (FASM). The FASM, as opposed to the first-order state-space model, preserves the physical significance of original systems and makes it feasible to apply the control rule entirely. In order to approximate unknown system dynamics, novel neuroadaptive laws with few learning parameters are then suggested. To counteract the negative effects of actuator faults, the Nussbaum function and adaptive approach are utilized. In addition, a cooperative fault-tolerant protocol is suggested, wherein consensus errors are uniformly ultimately bounded. The lack of virtual control variables in the proposed protocol reduces its complexity. The theoretical results are then validated by numerical simulations.
5 June 2023 in IEEE Transactions on Aerospace and Electronic Systems
The formation control of heterogeneous multi-agent systems that are subjected to actuator faults is addressed in this work. To prevent the spread of faults among agents, a hierarchical design approach is utilized. In the upper layer, distributed prescribed-time observers are presented to estimate the leader's trajectory for followers on directed graphs. In the lower layer, adaptive fault-tolerant controllers are provided for the heterogeneous multi-agent systems subjected to partial effectiveness loss faults based on the fully actuated system model. Contrary to the results of fault-tolerant control that are already in use, the proposed method enables formation errors to zero within a predetermined time that can be set freely. What's more, the estimated errors of efficiency factors are bounded. Finally, simulation results are provided to show the suggested protocol's availability.
27 October 2022 in IEEE Transactions on Systems, Man, and Cybernetics: Systems
In this article, a boundary control scheme is proposed to suppress 2-D vibration of Euler–Bernoulli beam with output constraints and input saturation. The original partial differential equations (PDEs) model is transformed to a new form containing virtual control. Then a boundary controller is designed via the backstepping method to suppress the coupled vibration. The hyperbolic tangent function and Nussbaum function are employed to deal with the input saturation. A barrier Lyapunov function with time adjusting function is introduced to suppress the structural vibration of Euler–Bernoulli beam with arbitrary initial conditions. The disturbance observer is designed to deal with the unknown boundary disturbance. Finally, the simulation results show the effectiveness of the proposed vibration controller.
27 March 2025 in IEEE Transactions on Automation Science and Engineering
This paper studies practical prescribed-time control of fully actuated heterogeneous multiagent systems subjected to actuator faults. A new observer-based containment control structure is given in the scenario that only a small number of followers can access the knowledge of leaders. Firstly, prescribed-time distributed input, velocity, and position observers are designed to estimate the information of the convex hull that leaders have spanned. Then, the original practical prescribed-time fault-tolerant control issue is transformed into one with a deferred constraint on tracking errors by introducing a time-varying constraining function, and decentralized tracking controllers are designed based on the system’s fully actuated system model. With the prescribed-time prescribed performance function, the proposed method allows for the advance determination of the settling time and the final tracking accuracy as needed, as well as the reduction of the impact of actuator faults on the system without the need for actuator fault parameter estimations. The efficacy of the suggested approach is shown through simulation results.