23 May 2012 in Advanced Energy Materials
1 January 2010 in Journal of the Electrochemical Society
In this work, an analytical model of the microporous layer (MPL) and the catalyst layer (CL) interface under compression is developed to investigate the effects of the MPL|CL interfacial morphology on the ohmic and mass transport losses at the MPL|CL interface in a polymer electrolyte fuel cell (PEFC). The model utilizes experimentally measured surface profile data as input. Results indicate that the uncompressed surface morphology of mating materials, the elasticity of PEFC components, and the local compression pressure are the key parameters that influence the characteristics of the MPL and CL contact. The model predicts that a 50% drop in the MPL and CL surface roughness may result in nearly a 40% drop in the MPL|CL contact resistance. The model also shows that the void space along the MPL|CL interface can potentially store a significant amount of liquid water <mml:math display="inline"><mml:mrow><mml:mo>(</mml:mo><mml:mn>0.9</mml:mn><mml:mo>–</mml:mo><mml:mn>3.1</mml:mn><mml:mspace width="0.3em"></mml:mspace><mml:mi>mg</mml:mi><mml:mo>∕</mml:mo><mml:msup><mml:mi>cm</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msup><mml:mo>)</mml:mo></mml:mrow></mml:math>(0.9–3.1mg∕cm2) , which could result in performance loss and reduced durability. A 50% drop in the MPL and CL surface roughness is expected to yield nearly a 50% drop in the water storage capacity of the MPL|CL interface. The results of this work provide key insights that will enhance our understanding regarding the complex relation between MPL|CL interfacial structure and cell performance.
4 April 2019 in Journal of Applied Electrochemistry
14 July 2014 in Physical Chemistry Chemical Physics
In this study, we have developed an in situ distributed diagnostics tool to investigate spatial and temporal effects in electrochemical systems based on flowable electrodes. Specifically, an experimental approach was developed that enables spatially-resolved voltage measurements to be obtained in situ, in real-time. To extract additional data from these distributed measurements, an experimentally-parameterized equivalent circuit model with a new ‘flow capacitor’ circuit element was developed to predict the distributions of various system parameters during operation. As a case study, this approach was applied to investigate the behavior of the suspension electrodes used in an electrochemical flow capacitor under flowing and static conditions. The volumetric capacitance is reduced from 15.6 F ml−1 to 1.1 F ml−1 under flowing conditions. Results indicate that the majority of the charging in suspension electrodes occurs within ∼750 μm of the current collectors during flow, which gives rise to significant state-of-charge gradients across the cell, as well as underutilization of the available active material. The underlying cause of this observation is attributed to the relatively high electrical resistance of the slurry coupled with a stratified charging regime and insufficient residence time. The observations highlight the need to develop more conductive slurries and to design cells with reduced charge transport lengths.
7 February 2017 in Journal of Applied Electrochemistry
1 September 2021 in Journal of the Electrochemical Society
In this work, Ti 3 C 2 T x MXene was investigated as electrocatalyst material for the anodic V 2+ /V 3+ reaction in vanadium redox flow batteries (VRFBs). A simple drop coating process was established using additive-free, aqueous MXene dispersions to fabricate MXene-coated carbon paper electrodes. The performance of Ti 3 C 2 T x as an anodic electrocatalyst was studied using cyclic voltammetry and electrochemical impedance spectroscopy in a three-electrode cell. Furthermore, flow battery testing was performed to determine the performance of the modified electrodes. At a current density of 50 mA cm −2 , the electrode with Ti 3 C 2 T x loading of 0.2 mg cm −2 enabled a 7% higher energy efficiency and 22% higher electrolyte utilization rate than the pristine electrode. At a higher current density (100 mA cm −2 ), the energy efficiency and electrolyte utilization were increased by 17% and 46%, respectively. At 50% SOC, the coated electrode was able to reach a limiting current density of 220 mA cm −2 while maintaining a voltaic efficiency above 80%, whereas the pristine electrode could only reach up to 160 mA cm −2 at the same voltaic efficiency. The improved performance was mainly attributed to the enhanced electrode kinetics, increased electrochemically active surface area, and improved wetting properties due to the addition of Ti 3 C 2 T x nanoflakes.