A multi-longitudinal mode (MLM) laser beat-frequency optical fiber vibration sensor using a frequency modulation (FM) radio integrated circuit module as the FM demodulation scheme is presented and demonstrated. To the best of our knowledge, this is the first case where a fiber-optic sensing system is combined with an FM radio module, and dynamic sensing is well achieved. As the carrier of the vibration source, the beat-frequency signal (BFS) generated by the MLM laser is transmitted to the FM radio module for FM and demodulation. The experimental results show that the system can successfully detect the vibration signal in the frequency range of 20 Hz to 18 kHz and accurately demodulate the waveform and amplitude of the vibration signal source. The minimum shape variable detected by the system is 20.67 nm, based on the performance of the commercial FM radio module itself, which can effectively solve the problem of detecting tiny vibration. The idea of the optical fiber vibration sensing system is extremely innovative, with high sensitivity, high signal-to-noise ratio (SNR), good stability, and strong resistance to electromagnetic interference.
With the development of system-level demand response transactions, diversified demand side resources are participating in the interaction with the power grid, which intensifies the problem of data mutual trust between power grid companies and users. In this regard, the potential data trust problems in the process of DR market clearing and load reduction calculation are analyzed, including data leakage and data abuse. Then, a DR transaction framework based on blockchain is proposed with secret sharing based secure multi-party computation adopted. For user different quotation modes, additive secret sharing algorithm is introduced for DR market clearing, and polynomial interpolation-based secret sharing algorithm is adopted for the trusted calculation of user load reduction. Under the proposed DR transaction framework based on blockchain and secure multi-party computation, data mutual trust problems between power grid companies and users can be properly solved.
This paper takes a graduate workshop in shenyang as the research object, and uses Airpak software to conduct numerical simulation analysis on the air distribution and thermal comfort of the fan coil side air supply mode in winter. The measured air supply temperature is 25°C, air supply speed in the x direction for 0.8m / s, 1.5m / s and 2.3m / s three gears, from east to west up to back air supply 3mode. With the increase of air supply speed, the temperature of the working area gradually increases, and the wind speed increases. PMV index and PPD index were used to evaluate the indoor comfort under the three air supply speeds. The air sup 3ply speeds of 1.5m/s and 2.3m/s can meet the requirements of indoor comfort. According to the distribution of personnel, 18 measuring points were set for measurement. The comparison between the simulation results and the measured results showed a consistent trend, which verified the feasibility and accuracy of Airpak for indoor thermal environment comfort analysis.