27 September 2021 in IEEE Access
A high-efficiency microwave power transmission (MPT) system based on an inverted class F ( $\text{F}^{-1 }$ ) rectifier for microwave wireless charging applications is presented in this paper. A left-hand circular polarization (LHCP) transmitting antenna (Tx) is designed based on a modified sequential phase rotation (SPR) divider integrated with a $2\times 2$ array. The proposed Tx exhibits compact size with LHCP maximum gain of 11.85 dBi at 5.8 GHz. Furthermore, the receiver is composed of an LHCP receiving antenna (Rx) and a microwave $\text{F}^{-1}$ rectifier. To realize the power radiated region of the Tx, an Rx with a wide beamwidth for minimizing distance loss is proposed, which has a 3-dB axial ratio (AR) beamwidth of 165.55° and 175.17° in the $x - z$ and $y - z$ planes, respectively. In addition, to improve the RF to DC conversion efficiency ( $\eta $ ), the class $\text{F}^{-1}$ harmonic processing network is utilized at the load of the rectifier that can process the voltage and current waveforms without using a DC pass filter. The proposed $\text{F}^{-1}$ rectifier circuit occupies a compact area of $15.3\times12.7$ mm 2 , and it exhibits an average $\eta $ of 50% for the input power range from 4 to 20 dBm with a peak efficiency of 77.9% at 18 dBm. Overall, the experimental results show that our proposed system achieves a maximum power transmission efficiency (PTE) of 8.8% for wirelessly charging low-power multiple devices at a distance of 60–200 mm.
8 August 2022 in IEEE Transactions on Microwave Theory and Techniques
To improve the power handling capability at ground stations of a 5.8-GHz solar space power satellite using microwave power transmission, a power charge-pump meta-semiconductor field-effect transistor (MESFET)-based rectifier is presented in this article. Unlike conventional microwave Schottky diodes, diode-connected MESFETs, whose nonlinear characteristics help them to have a unique current–voltage (I-V) curve that overcomes the limitations of a Schottky diode. Thus, the maximum input power of the proposed rectifier is extended up to 251.2 mW by replacing a Schottky diode with a diode-connected MESFET. Additionally, a class F harmonic processing network is introduced to control the voltage and current waveform at the load of the rectifier. Consequently, the RF-dc conversion efficiency is increased since the power dissipation is limited at the junction resistance of both the drain and the source of the MESFET. Owing to the abnormal characteristics of the diode-connected MESFET, the measured conversion efficiency of our rectifier is approximately 73.2% at 126 mW, and the input power range for rectifier efficiency higher than 50% is between 16 and 224 mW. The proposed rectifier for the space solar power satellite application is demonstrated and verified using a microwave wireless power transmission system.
25 July 2022 in IEEE Antennas and Wireless Propagation Letters
This letter presents a flat-top radiation transmitter (Tx), which is composed of 2 × 2 array patches connected to the ground plane of the aperture by four shorting vias, which can generate a mushroom structure resulting in back lobe level reduction. The final design exhibits an overall size of 1.93 $\lambda _{0}$ × 1.93 $\lambda _{0}$ × 0.075 $\lambda _{0}$ at 5.8 GHz. The measured results agree well with the simulated results, which achieves a maximum left-hand circular polarization gain of 8.5 dBi with a sidelobe level of $< $ −13.5 dB, and 3 dB beamwidths of 80 $^{\circ }$ in both the E- and H- planes. Moreover, the proposed transmitter is tested with the rectenna showing that a stable received energy of 5.93 mW is obtained with an exciting 1 W input power in case of receiving antenna lateral misalignment of up to 60 mm, which demonstrates feasibility in practical deployment. Compared with the other works, the proposed antenna has the advantage in compactness and wide 3 dB beamwidth.
21 June 2023 in IEEE Access
This paper presents a compact broadband circularly polarized (CP) implantable antenna at the Medical Device Radio communications Service (MedRadio) band (401-406 MHz). The proposed antenna is designed by utilizing the ladder structure slots along with shorting strategy on the radiating patch, and embedding the chip capacitors loading on the ground plane. The proposed antenna’s performances are tested via numerical simulations in a three-layer phantom model. The prototypes are experimentally measured with minced pork as well as in muscle-mimicking gel, and the results show a good agreement. The experiment results indicated that the proposed CP antenna has a small overall size of 9.5 mm × 9.5 mm × 0.64 mm (57.76 mm 3 ) with a broad impedance matching of 25% from 350 MHz to 469 MHz, a realized gain of -31.2 dBi, and produces a wide axial ratio (AR) bandwidth of 30.5% (123 MHz with ranger from 337 MHz to 460 MHz). Moreover, the maximum specific absorption rate (SAR) value also complies with the IEEE standard safety requirements. To the best of our knowledge, the proposed CP antenna is the compactest dimension with wider impedance matching, and greater gain value (without using superstrate) and obtain CP with widest AR bandwidth compared to previously reported works in the MedRadio band.
7 October 2024 in IEEE Microwave and Wireless Technology Letters
This letter presents a novel methodology for realizing a high-efficiency harmonic-controlled dual-band (dB) rectifier with compactness and low complexity. Specifically, the DB fundamental impedance matching network and the DB harmonic suppression filter are co-designed within a four-transmission lines (TLINs) structure, which reduces the design complexity and the overall circuit size resulting in low insertion loss for power conversion efficiency (PCE) maximization. A prototype is implemented using a Schottky diode model BAT15-03W at two separate frequencies of 2.45 and 5.8 GHz for verification. The measurement results show high peak PCE of $77.8\%$ and $73.9\%$ recorded at 2.34 and 5.62 GHz, respectively, while the realized rectifier has a small size of 39 $\times$ 21 mm. Compared to other state-of-the-art designs, the proposed rectifier exhibits advantages in terms of high PCE and compactness.
31 May 2025 in Journal of Electromagnetic Engineering and Science
In this letter a novel rectenna featuring fully integrated rectification within a uniformly radiating antenna for a microwave power transmission system is presented. The proposed structure consists of a magneto-electric ring dipole antenna fed by a pair of parallel lines and a class-F rectifier. For compactness and a low profile, the class-F rectifier was fully integrated into the backside of the antenna’s feeding mechanism while maintaining its uniform power radiation characteristics and impedance matching between the rectifier and antenna at 5.8 GHz. The proposed structure’s overall dimensions are 0.97λ0 × 0.97λ0 × 0.27λ0, and it has been fabricated and measured. The measured results show that the proposed rectenna has a peak conversion efficiency of 79% at 5.8 GHz. Moreover, the proposed rectenna can maintain a uniform voltage of 1.9 V in the diameter range of 50 mm. With its structure and uniform power radiation, the proposed integrated rectenna is well suited for a microwave power transmission system.