This study presents the application of a life cycle assessment (LCA)-based calculation method to support sustainable concrete mix design in Uruguay. The aim was to evaluate the environmental performance of traditional and alternative concrete mixtures with comparable technical performance, representative of ready-mix concrete production in Uruguay. The functional unit was 1 m3 of concrete. Three types of concrete were analyzed: conventional concrete (CC) with two strength levels (25 MPa and 40 MPa) and a self-compacting concrete (SCC). For each case, reference mixtures produced with Portland cement were compared with alternative mixtures incorporating supplementary materials. In CC mixtures, calcined clay (metakaolin) was used as a partial replacement of Portland cement, while in SCC mixtures the cement was partially replaced by quarry crushing fillers obtained from granodiorite and limestone stone powder. The LCA system boundaries were defined as cradle-to-construction site (A1-A4) according to UNIT-ISO 21930, including raw material production, transport to the batching plant, concrete production, and delivery to the construction site. Life cycle inventory data were mainly obtained from the Ecoinvent v3.x database and complemented with local information. Environmental impacts were evaluated using the ReCiPe 2016 Midpoint method, considering the impact categories defined within this method. The results indicate that reducing Portland cement content through the use of calcined clay and quarry fillers significantly decreases environmental impacts, particularly in climate change and fossil resource scarcity, while maintaining the required technical performance