1 January 2018 in Advances in Civil Engineering
The maximum capillary rise height of soil is a complex system which is mainly determined by the distribution characteristics of soil pores. The tests of the rising height of capillary water on 8 kinds of soils by the method of vertical tube are widely conducted to measure the maximum capillary rise height. Based on the BCC model and principles of thermodynamics, the soil‐water characteristic curve test is designed for the purpose of calculating the pore distribution of soil samples. A new method for calculating the maximum capillary rise height of soil is proposed by the author by using the distribution function of the soil pore. The coefficient β which reflects the relationship between the maximum capillary rise and the average pore radius of soils is utilized during the calculation process, and then the reference range of β for different soils is obtained according to series of experiments corresponding. The proposed calculation method offers an effective way to calculate the maximum capillary rise height, which can be applied to analyze the capillary effect area of relevant engineering problems.
1 January 2018 in Advances in Civil Engineering
This study focused on the swelling behavior of swelling rock from canal basement under multiple drying‐wetting (D‐W) cycles. A series of laboratory tests were conducted on a swelling rock, with the cracking and strength behaviors investigated. By using image‐processing technique, the crack patterns were described, and then quantitatively analyzed on the basis of the fractal dimension. The experimental data indicated that swelling ability, including cracking level, fractal dimension, and strength, decrease with increasing drying and wetting cycle. On this basis, a series of centrifuge model simulations for simulating slope failure by drying‐wetting cycles were performed, where the drying process was achieved by heat bulbs. The monitoring results suggested that a global slope failure has occurred after total cycle of 4th corresponding to 4 years. Due to the development of surface cracking, the infiltration in the slope was severe and nonuniform in space and time. Meanwhile, the failure mechanism of soft rock slope induced by D‐W was discussed.
23 January 2019 in Advances in Civil Engineering
By using the high‐temperature and high‐pressure triaxial apparatus, 81 undrained triaxial shearing tests of GMZ bentonite were carried out, and the effects of temperature, confining pressure, water content, and dry density on the deformation and strength characteristics of GMZ bentonite were systematically analyzed. Five results are presented in this paper: (1) confining pressure and dry density have a great influence on the failure forms of GMZ bentonite; under the nonconfined pressure condition, the failure forms of the specimen are brittle failure, and it is the same with high dry density, but the specimens with low dry density and high confining pressure exhibit plastic failure; (2) the strength of GMZ bentonite decreases with increasing water content; the position of the deviator stress‐axial strain curve under low dry density rises with the increase of temperature, whereas the location of the curve under high dry density decreases with the rise of temperature; (3) initial Young’s modulus rises with increasing temperature under low dry density, but it is on the contrary under high dry density; with rising water content, initial Young’s modulus generally decreases; (4) Poisson’s ratio rises with rising temperature. The effect of dry density and water content on Poisson’s ratio is insignificant; and (5) the formulae of cohesion and internal friction angle of GMZ bentonite with the changing dry density, water content, and temperature are proposed, respectively. The research results of this paper provide a scientific basis for analyzing the thermo‐hydro‐mechanical coupling characteristics of buffer materials.
1 October 2021 in IOP Conference Series: Earth and Environmental Science
1 January 2019 in Advances in Civil Engineering