1 May 2018 in Materials Science and Engineering: A
MNMahmoud Nili-Ahmadabadi
1 March 2018 in Materials Science and Engineering: A
MNMahmoud Nili-Ahmadabadi
1 March 2019 in Materials Science and Engineering: A
MNMahmoud Nili-Ahmadabadi
20 November 2023 in Metallography, Microstructure, and Analysis
MHMahdi Habibnejad-Korayem
The conventional Kroll and Keller’s reagents do not reveal uniformly additive manufactured Ti–6Al–4V microstructures, as etching is not uniform over the surface and only detailed electron back scattering diffraction analyses can reveal the details in the microstructures. In this research, an alternative etching solution has been proposed to reveal the microstructures of additive manufactured Ti–6Al–4V. The alternative reagent, never reported for titanium alloys, is known to be efficient for steel microstructures. It is a basic water-based solution containing NaOH and NaNO3 operational at 90 °C for a holding time of up to 30 s. Similar regions of martensitic microstructures generated in 3D-printed parts using laser powder bed fusion were etched by various reagents and compared. The alternative reagent provides optical image resolution at least one order of magnitude superior to the ones obtained with the conventional reagents. It is particularly efficient at revealing as-built martensitic microstructures and can reveal very fine features down to 0.70 µm. Such precise observation provides valuable information on microstructure evolution after heat treatments or hot isostatic pressing.
1 August 2009 in International Journal of Material Forming
2 May 2026 in SSRN Electronic Journal
Liquid metal embrittlement (LME) poses a significant challenge in the automotive industry because it can cause circumferential surface cracks adjacent to the weldment, especially when resistance spot welding (RSW) is used on third-generation advanced high-strength steel (3G-AHSS). Numerous studies aim to predict the onset of LME cracks during welding. The Gleeble test is often used to understand the LME crack mechanism, such as identifying the critical stress levels at various temperatures. An investigation developed a finite element method (FEM) to predict LME cracks; however, validation against actual welding conditions remains limited. This research assesses the critical stress during actual welding within a temperature range of 594 °C to 786 °C and compares it with results from the Gleeble test. Findings indicate that the critical stress obtained from Gleeble tests directly correlates the critical stress necessary to initiate LME crack during welding.