Recent advances in the production and development of two-dimensional transition metal dichalcogenides (2D TMDs) allow applications of these materials, with a structure similar to that of graphene, in a series of devices as promising technologies for optoelectronic applications. In this work, molybdenum disulfide (MoS2) nanostructures were grown directly on paper substrates through a microwave-assisted hydrothermal synthesis. The synthesized samples were subjected to morphological, structural, and optical analysis, using techniques such as scanning electron microscopy (SEM), X-ray diffraction (XRD), and Raman. The variation of synthesis parameters, as temperature and synthesis time, allowed the manipulation of these nanostructures during the growth process, with alteration of the metallic (1T) and semiconductor (2H) phases. By using this synthesis method, two-dimensional MoS2 nanostructures were directly grown on paper substrates. The MoS2 nanostructures were used as the active layer, to produce low-cost near-infrared photodetectors. The set of results indicates that the interdigital MoS2 photodetector with the best characteristics (responsivity of 290 mA/W, detectivity of 1.8 × 109 Jones and external quantum efficiency of 37%) was obtained using photoactive MoS2 nanosheets synthesized at 200 °C for 120 min.
Luminescence down-shifting (LDS) is used in several photovoltaic technologies aiming to improve the photon conversion efficiency (PCE) of the devices through the increase of the light harvesting in the regions of the electromagnetic spectrum where the EQE of the solar cells is poor. The aim of this work was to produce films of mixtures (blends) of two luminescent materials, dispersed in a poly-methyl methacrylate (PMMA) matrix, hoping to improve their properties both as LDS layer and as UV filter when applied on the clear, external surface of P3HT:PC 61 BM photovoltaic devices. The best results led to an increment of 7.4% in the PCE of the devices, and a six fold enhancement in their half-life ( T50% ). This study indicates that multidye LDS layers with optimized optical properties can lead to an effective improvement in the performance and operational stability of OPVs.
2 December 2010 in Journal of Physical Organic Chemistry
During the last few years, great interest has been given to research in organic solar cells. Apart from the low cost techniques needed for the production of the active layers, the plasticity of these types of materials offers an additional benefit compared to traditional silicon-based solar cells. However, the commercialization of organic photovoltaic technologies is limited by rapid degradation and low efficiency. Recently, the use of luminescent down-shifting (LDS) films has been explored as a tool for increasing the external quantum efficiency of organic-based devices. A previously observed superposition in the emission–absorption spectra of Kremer blue (Kb) and Coumarin 7 (C7) dyes suggests that an energy transfer process can take place among these molecules. Decay time photoluminescence measurements in samples were carried out to confirm a Föster resonance energy transfer process. An optimization process following the design of experiments methodology was carried out to adjust the optical properties of films for applications in the : organic photovoltaic device. An increment of 18.6% in the short circuit current density ( ) of : devices coated with a LDS film was observed. A degradation test shows a rapid drop in the electric current density of devices without the LDS film, which we attribute to the so-called burn-in, widely reported in the literature. For devices coated with the LDS film, no rapid drop in the electric current density was observed, suggesting that the use of the luminescent layer mitigates the photoinduced burn-in loss.