20 March 2026 in Swarm and Evolutionary Computation
8 December 2025 in IEEE Transactions on Device and Materials Reliability
A novel radiation-hardened 14T (NRH-14T) SRAM cell based on 16nm FinFET process is designed in this paper. The NRH-14T cell can recover from errors induced by single-event upsets (SEUs) and is capable of resisting multiple-bit upsets caused by charge-sharing effects. The NRH-14T cell employs an interlocking structure to protect against SEUs. To address the write-failure issue caused by the interlocking structure, four access transistors are utilized in NRH-14T cell. Due to the small size of FinFET devices, the charge-sharing effect is more likely to induce multiple-bit upsets in the circuit, thereby leading to hardening failure. To reduce the impact of charge sharing and recover from multiple-bit upsets with minimal area cost, an optimized NRH-14T cell layout is designed and verified. The single-event transient (SET) pulse waveform generated by particle strikes on FinFET devices, distinct from that of planar devices, is extracted and employed to verify the error-tolerance performance of the NRH-14T cell. Verification results indicate that the NRH-14T cell, with an acceptable increase in area cost, achieves 30.89ns read speed and 49.32ns write speed, can resist SEUs under all conditions with a critical charge of 13fC, and can recover from multiple-bit upsets.
1 September 2026 in IEEE Transactions on Device and Materials Reliability
In recent years, Convolutional Neural Networks (CNNs) have emerged as a cornerstone technology for image processing tasks in safety-critical domains. Although advanced Artificial Intelligence (AI) acceleration devices are ideal for space applications due to their high computational efficiency and flexibility, they remain highly susceptible to Single Event Upsets (SEUs) and are still constrained by limited resources. Thus, it becomes imperative to design CNN implementations for Field- Programmable Gate Array (FPGA) devices that achieve a delicate balance between low cost and high reliability. However, traditional hardening strategies often neglect the sensitivity of internal nodes, relying instead on global or coarse-grained module-level hardening strategies that significantly increase resource overhead and degrade timing performance. To address this issue, we propose a basic unit partitioning strategy that divides CNN accelerators into functionally independent circuit nodes. Within our fault analysis framework, we map fault locations to specific nodes using address mapping, enabling sensitivity analysis. Additionally, we implement fine-grained hardening on critical nodes identified through sensitivity analysis and compare this strategy against module-level coarse-grained hardening and full triple modular redundancy (TMR) strategies. Fault analysis results reveal that our strategy delivers excellent hardening effectiveness at a reduced cost. Our strategy achieves a 31.9% reduction in resource overhead and a 29.9% improvement in timing performance compared to Full_TMR, with comparable fault tolerance. Compared to module-level hardening strategies, our approach achieves higher hardening efficiency. The irradiation experiment results further validate the effectiveness of our strategy, achieving a 10.6× improvement in Mean Time To Failure (MTTF) compared to the unhardened baseline, which is comparable to that of full TMR. The proposed reliability evaluation method achieves high accuracy, with errors within ±4.3%. Overall, the proposed hardening strategy and reliability evaluation method present a significant advancement in designing robust and cost-effective systems, holding vast potential for adoption in safety-critical fields such as aerospace and autonomous driving.