The 65 nm Static Random Access Memory (SRAM) based Field Programmable Gate Array (FPGA) was designed and manufactured, which employed tradeoff radiation hardening techniques in Configuration RAMs (CRAMs), Embedded RAMs (EBRAMs) and flip-flops. This radiation hardened circuits include large-spacing interlock CRAM cells, area saving debugging logics, the redundant flip-flops cells, and error mitigated 6-T EBRAMs. Heavy ion irradiation test result indicates that the hardened CRAMs had a high linear energy transfer threshold of upset ∼18 MeV/(mg/cm ) with an extremely low saturation cross-section of 6.5 × cm /bit, and 71% of the upsets were single-bit upsets. The combinational use of triple modular redundancy and check code could decline ∼86.5% upset errors. Creme tools were used to predict the CRAM upset rate, which was merely 8.46 × /bit/day for the worst radiation environment. The effectiveness of radiation tolerance has been verified by the irradiation and prediction results.
Radiation effects can induce severe and diverse soft errors in digital circuits and systems. A Xilinx commercial 16 nm FinFET static random-access memory (SRAM)-based field-programmable gate array (FPGA) was selected to evaluate the radiation sensitivity and promote the space application of FinFET ultra large-scale integrated circuits (ULSI). Picosecond pulsed laser and high energy heavy ions were employed for irradiation. Before the tests, SRAM-based configure RAMs (CRAMs) were initialized and configured. The 100% embedded block RAMs (BRAMs) were utilized based on the Vivado implementation of the compiled hardware description language. No hard error was observed in both the laser and heavy-ion test. The thresholds for laser-induced single event upset (SEU) were ~3.5 nJ, and the SEU cross-sections were correlated positively to the laser’s energy. Multi-bit upsets were measured in heavy-ion and high-energy laser irradiation. Moreover, latch-up and functional interrupt phenomena were common, especially in the heavy-ion tests. The single event effect results for the 16 nm FinFET process were significant, and some radiation tolerance strategies were required in a radiation environment.
!With device scaling-down, circuits appear more susceptible to transient faults especially for the bulk silicon process. Thus, FD-SOI technology has been widely popular in serious radiation environment due to its high radiation-tolerance inherence created by an additional BOX layer. In this work, seven different inverter chains with two kinds of core voltages, four kinds of channel areas and a stack inverter chain are designed to investigate the SET in advanced 22 nm FD-SOI CMOS technology. A NAND chain is also designed and used for comparison with inverter chains. The sensitivities of diverse SET targets are characterized with different core voltages and heavy-ion tilts. Results showed that the inverter size and the driving current can dominate the occurrence and width distribution of transient pulses. Besides, heavy-ion strike angle, LET, and charge sharing can also affect the pulse width. Though a high LET can deposit adequate energy, the widest pulses are measured in low-LET 84Kr ion irradiation, rather than in high-LET ions’ irradiation, which are attributed to the pulse quenching effect and being investigated by Hspice simulation. The LET dependency and low voltage induced SET widening are all observed in irradiation tests and verified by circuit-level pulse injection. All of the SET sensitive targets are distinguished. The results are highly effective for the designers to suppress and correct the SET-oriented errors to achieve a radiation robust system.
11 December 2024 in IEEE Transactions on Aerospace and Electronic Systems
Designing a radiation-tolerant SRAM-based system poses a significant challenge for space facilities operating in radiation environments. Accurate evaluation of SEE sensitivity, along with the design of radiation-hardened memory cells and power management circuits is crucial, particularly for advanced nanotechnologies. In this paper, a radiation-tolerant FDSOI SRAM with two switchable bandgap reference circuits was designed. An additional SEE-hardened selection circuit was used to enable the targeted bandgap reference circuits. The ∼3×10 -14 cm 2 /bit saturated SEU cross section for the hardened SRAM device was measured by our heavy ion irradiation test. The bipolar bandgap reference circuit induced SET cross sections were confirmed by comparing different test modes. Besides, the features of 181 Ta-induced transients in the bipolar bandgap reference circuit were captured during our experiments. The designed two reference circuits exhibit SEE tolerance, although a few transients can be observed in the bipolar circuit, leading to a ∼30% increase in output voltage. The MOS bandgap reference circuit exhibits strong radiation resistance but is slightly inferior at controlling temperature drift and maintaining the stability of the reference voltage. The SET measurement results for the bipolar bandgap reference circuit reveal specific radiation sensitivity and potential risks for high-reliable SRAM systems, whereas the full MOS structure can further enhance the radiation tolerance of the entire system.
13 December 2021 in Nuclear Science and Techniques