25 November 2019 in Bulletin of Earthquake Engineering
25 July 2014 in Computers & concrete
12 December 2017 in KSCE Journal of Civil Engineering
Based on a database of 342 experimental results with a wide range of influencing parameters, a new empirical model was developed using Multiple Linear Regression (MLR) for predicting the concentric punching shear strength of RC slab-column connections, without shear reinforcement, and was presented in this paper. An Artificial Neural Network (ANN) and international codes of practice as well as a state-of-the-art approach were also employed for comparison purpose. To avoid the over-fitting problem, the ten-fold cross-validation method was used to evaluate the performances in prediction. Finally, by using reliability analysis, the safety of these formulations evaluated in terms of safety indexes was also conducted in this comparison. The results indicated that the authors’ approach developed using MLR provided the best combination of accuracy, simplicity, and safety for computation of the punching shear strength.
28 February 2022 in Engineering Structures
27 June 2019 in KSCE Journal of Civil Engineering
A safety assessment of various methods for designing RC (reinforced concrete) pile caps, consisting of the traditional and strut-and-tie methods (STMs) available in the international concrete codes of practice and state-of-the-art literature, was conducted using a probabilistic approach and is presented in this paper. The uncertainties in load effects and member strengths, including variability in material properties, dimensions and modeling error were considered as random variables. The safety index used as an indication of level of safety was analyzed utilizing Monte Carlo simulation with a wide range of live-to-dead load ratios and a usual range of normal strength concrete. It was found that the traditional method of American concrete code (ACI 318-14) and the shear design using British code (BS 8110) provided a lower level of safety than the STM approaches. Finally, for each pile cap design method, reliability-based understrength factors are proposed to satisfy the target safety index by more than 3.5.
15 December 2023 in Case Studies in Construction Materials