30 August 2018 in International Journal of Pavement Engineering
Many parts of Algeria are covered with windblown dune sand which is characterised as poorly-graded soil with relatively high permeability. Also, the coupling of asphalt concrete and cement bound layer is often used in pavement construction. The main purpose of this study, made of several stages, was the valorisation of dune sand in such road construction technique. Double layered samples were prepared in the laboratory with a compacted gravel cement concrete (GC) base course and an asphalt concrete (BB) surface course. GC was made by compacting a mixture of gravel, dune sand, cement and water: the cement percentage ranging from 4 to 12%. The Marshall method was used to design the upper bituminous layer. A thick anti-reflective cracking interlayer made of dune sand mixed with emulsion was also used. Twenty-five samples were prepared and tested by dynamic three-point bending tests on beams. Subsequently, results analysis was performed to quantify the influence of the dune sand interlayer on the mechanical behaviour of the system. The obtained results showed that the samples with as much as 30% of dune sand in the interlayer have sufficient mechanical performances to be used in road layers.
24 November 2025 in Comptes Rendus Mécanique
This study investigates crack propagation in concrete mortar under quasi-static tensile loading with imposed displacement. Several rectangular cubic concrete specimens containing a predefined crack and hole were cast and tested. The load–displacement curves and crack paths were obtained experimentally and analyzed, enabling us to assess the influence of the specimen age parameter on fracture behavior. The evolution of mechanical properties as a function of age, in particular the modulus of elasticity and Poisson’s ratio (characterized by ultrasonic testing), was monitored. The fracture energy was determined by direct tensile testing. These parameters were fed into a phase field model implemented by the finite element method in a computational code developed in MATLAB®. The solution is based on a variational system that treats the displacement and damage fields in an alternating minimization scheme. The numerical results were compared in two distinct frameworks: one in a logical domain and the other in a physical domain. Finally, the results obtained in each of these frameworks were compared with experimental results, revealing relatively good agreement.