23 July 2025 in IEEE Sensors Letters
Enabling broad use of electromagnetic energy harvesting in wireless sensor screws requires robust systems that work with weak vibrations and varying frequency profiles. This contribution presents an energy management circuit incorporating two cooperating DC–DC converters controlled by self-powered mosfet switches and a passive voltage multiplier enabling low-voltage start-up. The circuit operates effectively over an acceleration range of 0.07–0.21 g. It consistently harvests energy across a wider frequency range than energy management circuits based on single DC–DC converters. For example, at an acceleration of 0.21 g, the frequency range is 20–30 Hz. Thereby, it realizes, e.g., at 25 Hz, an efficiency of 72%. The proposed circuit enables robust energy harvesting in a wide frequency range, supporting wireless sensor operation even under low-vibration conditions typical of industrial predictive maintenance.
24 August 2025 in International Journal for Numerical Methods in Engineering
This study presents a multiscale finite element investigation into how particle dimensions influence the performance of piezoelectric nanogenerators (PENGs) based on PDMS/ nanocomposites. Using COMSOL Multiphysics, we developed a comprehensive computational framework to analyze the effects of particle size (50 nm, 100 nm, 2 m and 5 m) and loading concentration (10%, 15%, 20%, and 25%) on energy harvesting efficiency. Our model integrates an advanced stochastic algorithm for particle distribution and employs representative volume element (RVE) analysis to accurately capture the material's heterogeneous microstructure. The model's validity was established through rigorous comparison with theoretical predictions of resonance frequencies and experimental power density measurements, demonstrating excellent agreement across multiple operating conditions. Our findings reveal that nanoscale particles (50–100 nm) generate substantially higher power densities compared to their microscale counterparts (2–5 m), with peak performance observed at 15–20 wt.% particle concentration. The results emphasize the significance of particle size in enhancing PENG efficiency, providing a basis for improved material design and device optimization.