23 July 2025 in IEEE Sensors Letters
Enabling broad use of electromagnetic energy harvesting in wireless sensor screws requires robust systems that work with weak vibrations and varying frequency profiles. This contribution presents an energy management circuit incorporating two cooperating DC–DC converters controlled by self-powered mosfet switches and a passive voltage multiplier enabling low-voltage start-up. The circuit operates effectively over an acceleration range of 0.07–0.21 g. It consistently harvests energy across a wider frequency range than energy management circuits based on single DC–DC converters. For example, at an acceleration of 0.21 g, the frequency range is 20–30 Hz. Thereby, it realizes, e.g., at 25 Hz, an efficiency of 72%. The proposed circuit enables robust energy harvesting in a wide frequency range, supporting wireless sensor operation even under low-vibration conditions typical of industrial predictive maintenance.
27 August 2025 in Proceedings of the Design Society
The amount of electronic waste worldwide is increasing every year and the often incorrect handling of it has a major impact on the ecosystem. As electronics are also gaining more share in the automotive sector, the industry has to find a suitable way of dealing with them at the vehicle’s end-of-life stage. For this reason, this work introduces an approach consisting of the Physical Component Mapping (PCM) for the interface representation of automotive electronics, alongside the Eco-Sensitivity Framework (ESF) as guidance for circular automotive electronics design. A case study shows how the approach accompanies the product development process and supports identifying suitable strategies that are potentially possible or can be made available through design changes. This helps car makers and suppliers of vehicle electronics to accelerate their transition to a circular economy.
4 March 2025 in IEEE Transactions on Consumer Electronics
Designing an efficient Inductive Power Transfer (IPT) system involves significant challenges. On the transmitter side, it is essential to provide the transmitter coil with an alternating current (AC) operating within the kHz-MHz frequency range, which is generally generated by inverters linked to an intermediate direct current (DC) bus. While methods such as Zero Voltage Switching (ZVS) and Zero Current Switching (ZCS) can effectively minimize losses, they frequently lead to increased design complexity and voltage distortion. This paper introduces a compact and highly efficient transmitter circuit, with dimensions of 40 x 60 mm, utilizing an enhanced Class B AC-AC amplifier. This amplifier incorporates an operational amplifier with adjustable gain to deliver a trapezoidal waveform to the gates of the connected MOSFETs. The specific waveform effectively reduces crossover distortion and enhances the overall efficiency of the converter. Experimental results indicate that the efficiency of the proposed circuit surpasses 98%, which is suitable for powering small to medium load levels.
11 August 2025 in IEEE Sensors Letters
Automotive electronics form a system that has been iteratively expanded into a complex architecture. Without having access to manufacturer data, insights into the functional end electrical behavior of the subsystems and their interdependencies inside a vehicle remain unclear. This makes it difficult for research to develop sophisticated optimization solutions for energy consumption and computing power to accelerate the environmental impact reduction of the automotive sector and to fulfill governmental regulations. Existing measurement systems are either expensive or lack measurement granularity, which restricts accessibility to data and results in assumption-based contributions. This work presents a novel low-cost modular in-vehicle sensor system designed to monitor the energy consumption of automotive auxiliary systems. The novelty of this approach lies in breaking down the power consumption to the level of components [electronic control units (ECUs), sensors, and actuators], while supporting correlation with vehicle driving parameters. This approach allows users a wide range of applications for analyzing the computing power of individual ECUs, as well as the traceability of control logics by recording the activation/deactivation of actuators and sensors. The recording allows a digital image of the functions to be created and optimized in a simulation and compared with the real electrical/electronic architecture. This easy-to-integrate system, powered via USB and using adapter connectors for noninvasive setup, offers six channels to measure up to 18 V and 10 A at 200 Hz (12-bit resolution). Validated in a test vehicle on park distance control and surround view systems, it identified how vehicle speed affects sensor activation and ECU power, pinpointing opportunities for idle modes and energy savings.