12 June 2009 in IEEE Transactions on Power Electronics
This study presents an efficient control technique for computing the optimum space-vector voltage in power converters. The presented optimized direct power control (ODPC) provides a closed-form formula for the converter space-vector voltage, which, based on Lagrange operators for the optimum trajectory, provides the commanded complex apparent power. The voltage required by the ODPC is obtained with a standard modulation that synthesizes the mean value required during the control cycle. The converter's performance using the ODPC algorithm improves over existing DPC-based algorithms that use constrained optimization, such as preselected space vectors or switching tables, by providing a further harmonic in content reduction, lower computational requirements, and faster time response to changes in active and reactive power commands. The use of the ODPC results in an almost instantaneous active and reactive power reference tracking, allowing for full power inversion in less than 1.0 ms under constant switching operation. Simulation results and experimental verifications are presented to validate the advantages of the proposed control algorithm. The scope of applications of this technique is those that require low harmonic impact on the ac power supply and for power quality improvement in general.
1 December 2013 in IEEE Transactions on Power Electronics
This paper presents a general filtering and unbalance compensation scheme for electric traction systems using a direct power control-based algorithm. For a balanced three-phase three-wire system, the proposed method is able to control the power flow exchange between the grid and the load so that the instantaneous complex power is maintained constant. As a consequence, any nonlinear unbalanced load is seen by the three-phase supply as a balanced linear load. The proposed filter is evaluated on power substations with open delta (V-V) and Scott transformer feeders, and for two-level and dual-converter in the power stage. The scheme has been simulated and experimentally validated. The results from experimental and simulation tests show the controller advantages and the applicability of the proposed method in railway systems.
1 May 2011 in IEEE Transactions on Power Electronics
This paper presents a dual converter employed as a rectifier with power factor regulation and bidirectional power flow. The active and reactive powers flowing into the converter is controlled using an optimized direct-power-control algorithm. The multilevel structure of the converter is exploited to control the voltage level in each subconverter by selecting the modulation method from one commonly found in the literature, with the option of clamping one of the subconverters. These modulation methods are used to control the power taken by each subconverter, providing limited dc-link voltage regulation. The system is first simulated in SIMULINK, and the results are experimentally validated using a digital-signal-processor-based test rig.