The present paper deals with the study of unsteady heat and mass transfer characteristics of a viscous incompressible electrically conducting micropolar fluid. The flow past over a stretching sheet through a porous medium in the presence of viscous dissipation. A uniform magnetic field is applied transversely to the direction of the flow. Similarity transformations are used to convert the governing time dependent non-linear boundary layer equations into a system of non-linear ordinary differential equations that are solved numerically by Runge–Kutta fourth order method with a shooting technique. The influence of unsteady parameter (A), Eckert number (Ec), porous parameter (Kp), Prandtl number (Pr), Schmidt number (Sc) on velocity, temperature and concentration profiles are shown graphically. The buoyancy force retards the fluid near the velocity boundary layer in case of opposing flow and is favorable for assisting flow. In case of assisting flow, the absence of porous matrix enhances the flow. The impact of physical parameters on skin friction co-efficient, wall couple stress and the local Nusselt number and Sherwood number are shown in tabular form
The present study examines the effect of heat transfer on electrically conducting MHD micropolar fluid flow along a semi-infinite horizontal plate with radiation and heat source. The uniform magnetic field has applied along the principal flow direction. The obtained governing equations have been converted into a set of dimensionless differential equations and then numerically solved by using a well-known Runge-Kutta method with shooting technique. The velocity, microrotation, and temperature distribution are presented for various physical parameters. The numerical values of skin friction and Nusselt numbers at the plates are shown in tabular form, and the obtained results are compared with the results of a previous study. It has been found that the magnetic parameter increases the velocity profile whereas the boundary layer thickness reduces due to the inclusion of coupling parameter and inertia effect. The presence/absence of magnetic parameter and coupling parameter enable to enhance the angular velocity profile while it is worth to note that the backflow has generated in the vicinity of the plate.