Samad Ali

Samad Ali

Auto-generated profile, based on publicly available information

Samad Ali

Centre for Wireless Communications University of Oulu Finland

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 August 2021 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Open access
RHRamin Hashemi
Ramin Hashemi
SASamad Ali
Samad Ali
Nurul Huda MahmoodNurul Huda Mahmood
Nurul Huda Mahmood
MLMatti Latva-Aho
Matti Latva-Aho
In this paper, the average achievable rate and error probability of a reconfigurable intelligent surface (RIS) aided systems is investigated for the finite blocklength (FBL) regime. The performance loss due to the presence of phase errors arising from limited quantization levels as well as hardware impairments at the RIS elements is also discussed. First, the composite channel containing the direct path plus the product of reflected channels through the RIS is characterized. Then, the distribution of the received signal-to-noise ratio (SNR) is matched to a Gamma random variable whose parameters depend on the total number of RIS elements, phase errors and the channels’ path loss. Next, by considering the FBL regime, the achievable rate expression and error probability are identified and the corresponding average rate and average error probability are elaborated based on the proposed SNR distribution. Furthermore, the impact of the presence of phase error due to either limited quantization levels or hardware impairments on the average rate and error probability is discussed. The numerical results show that Monte Carlo simulations conform to matched Gamma distribution to received SNR for sufficiently large number of RIS elements. In addition, the system reliability indicated by the tightness of the SNR distribution increases when RIS is leveraged particularly when only the reflected channel exists. This highlights the advantages of RIS-aided communications for ultra-reliable and low-latency systems. The difference between Shannon capacity and achievable rate in FBL regime is also discussed. Additionally, the required number of RIS elements to achieve a desired error probability in the FBL regime will be significantly reduced when the phase shifts are performed without error.

16 February 2022 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
SMSedighe Mirbolouk
Sedighe Mirbolouk
MVmorteza valizadeh
morteza valizadeh
MAMehdi Chehel Amirani
Mehdi Chehel Amirani
SASamad Ali
Samad Ali
Non-orthogonal multiple access (NOMA) and coordinated multi-point (CoMP) are two fundamental techniques considered for the fifth generation (5G) of wireless communications. In this paper, a hybrid satellite-unmanned aerial vehicle (UAV) relay network (HSURN) is proposed where the UAV relays (URs) employ CoMP transmission to serve the terrestrial users (UEs). Furthermore, all UEs associated with the CoMP-URs form a single NOMA cluster. For this model, an optimization problem is formulated subject to the minimum quality of services (QoSs) requirements of the UEs, transmission power budgets and, successive interference cancellation (SIC), to select URs and allocate their transmission powers for the energy efficiency (EE) maximization. With this insight, first, a computationally efficient sub-optimal UR selection scheme is proposed. Then, the powers are allocated to the selected URs via the Lagrange multipliers optimization (LMO) method. Due to the non-convex nature of the considered problem, it is relatively difficult to be solved. Hence, a metaheuristic teaching-learning-based optimization (TLBO) algorithm is employed to achieve an efficient solution. Simulation results are provided to verify the effectiveness of the proposed sub-optimal relay selection scheme and the TLBO-based power allocation method compared to the LMO conventional method. Besides, the obtained results also reveal that the CoMP-NOMA transmission in the proposed scenario significantly improves the spectral efficiency (SE) and outage probability (OP) of the system compared to non-comp NOMA transmission case.

9 July 2019 in IEEE Transactions on Communications
Verified
Journal Article
Closed access
AFAidin Ferdowsi
Aidin Ferdowsi
SASamad Ali
Samad Ali
Walid SaadWalid Saad
Walid Saad
NMNarayan B. Mandayam
Narayan B. Mandayam
Autonomous connected vehicles (ACVs) rely on intra-vehicle sensors such as camera and radar as well as inter-vehicle communication to operate effectively which exposes them to cyber and physical attacks in which an adversary can manipulate sensor readings and physically control the ACVs. In this paper, a comprehensive control and learning framework is proposed to thwart cyber and physical attacks on ACV networks. First, an optimal safe controller for ACVs is derived to maximize the street traffic flow while minimizing the risk of accidents by optimizing ACV speed and inter-ACV spacing. It is proven that the proposed controller is robust to physical attacks which aim at making ACV systems unstable. Next, two data injection attack (DIA) detection approaches are proposed to address cyber attacks on sensors and their physical impact on the ACV system. The proposed approaches rely on leveraging the stochastic behavior of the sensor readings and on the use of a multi-armed bandit (MAB) algorithm. It is shown that, collectively, the proposed DIA detection approaches minimize the vulnerability of ACV sensors against cyber attacks while maximizing the ACV system’s physical robustness. Simulation results show that the proposed optimal safe controller outperforms the current state of the art controllers by maximizing the robustness of ACVs to physical attacks. The results also show that the proposed DIA detection approaches, compared to Kalman filtering, can improve the security of ACV sensors against cyber attacks and ultimately improve the physical robustness of an ACV system.

6 June 2022 in IEEE Communications Letters
Verified
Journal Article
Open access
RHRamin Hashemi
Ramin Hashemi
SASamad Ali
Samad Ali
Nurul Huda MahmoodNurul Huda Mahmood
Nurul Huda Mahmood
MLMatti Latva-Aho
Matti Latva-Aho
In this letter, a multi-objective optimization problem (MOOP) is proposed for maximizing the achievable finite blocklength (FBL) rate while minimizing the utilized channel blocklengths (CBLs) in a reconfigurable intelligent surface (RIS)-assisted short packet communication system. The formulated MOOP has two objective functions namely maximizing the total FBL rate with a target error probability, and minimizing the total utilized CBLs which is directly proportional to the transmission duration. The considered MOOP variables are the base station (BS) transmit power, number of CBLs, and passive beamforming at the RIS. Since the proposed non-convex problem is intractable to solve, the Tchebyshev method is invoked to transform it into a single-objective OP, then the alternating optimization (AO) technique is employed to iteratively obtain optimized parameters in three main sub-problems. The numerical results show a fundamental trade-off between maximizing the achievable rate in the FBL regime and reducing the transmission duration. Also, the applicability of RIS technology is emphasized in reducing the utilized CBLs while increasing the achievable rate significantly.

29 December 2022 in IEEE Internet of Things Journal
Verified
Journal Article
Open access
RHRamin Hashemi
Ramin Hashemi
SASamad Ali
Samad Ali
Nurul Huda MahmoodNurul Huda Mahmood
Nurul Huda Mahmood
MLMatti Latva-Aho
Matti Latva-Aho
We study the joint active/passive beamforming and channel blocklength (CBL) allocation in a nonideal reconfigurable intelligent surface (RIS)-aided ultrareliable and low-latency communication (URLLC) system. The considered scenario is a finite blocklength (FBL) regime and the problem is solved by leveraging a deep reinforcement learning (DRL) algorithm named twin-delayed deep deterministic policy gradient (TD3). First, assuming an industrial automation system, the signal-to-interference-plus-noise ratio and achievable rate in the FBL regime are identified for each actuator. Next, the joint active/passive beamforming and CBL optimization problem (OP) is formulated where the objective is to maximize the total achievable FBL rate in all actuators, subject to nonlinear amplitude response at the RIS elements, BS transmit power budget, and total available CBL. Since the formulated problem is highly nonconvex and nonlinear, we resort to employing an actor–critic policy gradient DRL algorithm based on TD3. The considered method relies on interacting RIS with the industrial automation environment by taking actions which are the phase shifts at the RIS elements, CBL variables, and BS beamforming to maximize the expected observed reward, i.e., the total FBL rate. We assess the performance loss of the system when the RIS is nonideal, i.e., with nonlinear amplitude response, and compare it with ideal RIS without impairments. The numerical results show that optimizing the RIS phase shifts, BS beamforming, and CBL variables via the TD3 method with deterministic policy outperforms conventional methods and it is highly beneficial for improving the network total FBL rate considering finite CBL size.

25 December 2024 in IEEE Transactions on Machine Learning in Communications and Networking
Verified
Journal Article
Open access
MLMehdi Letafati
Mehdi Letafati
SASamad Ali
Samad Ali
MLMatti Latva-Aho
Matti Latva-Aho
In this paper, conditional denoising diffusion probabilistic models (CDiffs) are proposed to enhance the data transmission and reconstruction over wireless channels. The underlying mechanism of diffusion models is to decompose the data generation process over the so-called “denoising” steps. Inspired by this, the key idea is to leverage the generative prior of diffusion models in learning a “noisy-to-clean” transformation of the information signal to help enhance data reconstruction. The proposed scheme could be beneficial for communication scenarios in which a prior knowledge of the information content is available, e.g., in multimedia transmission. Hence, instead of employing complicated channel codes that reduce the information rate, one can exploit diffusion priors for reliable data reconstruction, especially under extreme channel conditions due to low signal-to-noise ratio (SNR), or hardware-impaired communications. The proposed CDiff-assisted receiver is tailored for the scenario of wireless image transmission using MNIST dataset. Our numerical results highlight the reconstruction performance of our scheme compared to the conventional digital communication, as well as the deep neural network (DNN)-based benchmark. It is also shown that more than 10 dB improvement in the reconstruction could be achieved in low SNR regimes, without the need to reduce the information rate for error correction.