18 August 2021 in IEEE Transactions on Vehicular Technology
In this paper, the average achievable rate and error probability of a reconfigurable intelligent surface (RIS) aided systems is investigated for the finite blocklength (FBL) regime. The performance loss due to the presence of phase errors arising from limited quantization levels as well as hardware impairments at the RIS elements is also discussed. First, the composite channel containing the direct path plus the product of reflected channels through the RIS is characterized. Then, the distribution of the received signal-to-noise ratio (SNR) is matched to a Gamma random variable whose parameters depend on the total number of RIS elements, phase errors and the channels’ path loss. Next, by considering the FBL regime, the achievable rate expression and error probability are identified and the corresponding average rate and average error probability are elaborated based on the proposed SNR distribution. Furthermore, the impact of the presence of phase error due to either limited quantization levels or hardware impairments on the average rate and error probability is discussed. The numerical results show that Monte Carlo simulations conform to matched Gamma distribution to received SNR for sufficiently large number of RIS elements. In addition, the system reliability indicated by the tightness of the SNR distribution increases when RIS is leveraged particularly when only the reflected channel exists. This highlights the advantages of RIS-aided communications for ultra-reliable and low-latency systems. The difference between Shannon capacity and achievable rate in FBL regime is also discussed. Additionally, the required number of RIS elements to achieve a desired error probability in the FBL regime will be significantly reduced when the phase shifts are performed without error.
14 June 2022 in IEEE Transactions on Industrial Informatics
Future industrial applications will encompass compelling new use cases requiring stringent performance guarantees over multiple key performance indicators (KPI) such as reliability, dependability, latency, time synchronization, security, etc. Achieving such stringent and diverse service requirements necessitates the design of a special-purpose Industrial Internet of Things (IIoT) network comprising a multitude of specialized functionalities and technological enablers. This article proposes an innovative architecture for such a special-purpose 6 G IIoT network incorporating seven functional building blocks categorized into: special-purpose functionalities and enabling technologies. The former consists of Wireless Environment Control, Traffic/Channel Prediction, Proactive Resource Management and End-to-End Optimization functions; whereas the latter includes Synchronization and Coordination, Machine Learning and Artificial Intelligence Algorithms, and Auxiliary Functions. The proposed architecture aims at providing a resource-efficient and holistic solution for the complex and dynamically challenging requirements imposed by future 6 G industrial use cases. Selected test scenarios are provided and assessed to illustrate cross-functional collaboration and demonstrate the applicability of the proposed architecture in a wireless IIoT network.
6 June 2022 in IEEE Communications Letters
In this letter, a multi-objective optimization problem (MOOP) is proposed for maximizing the achievable finite blocklength (FBL) rate while minimizing the utilized channel blocklengths (CBLs) in a reconfigurable intelligent surface (RIS)-assisted short packet communication system. The formulated MOOP has two objective functions namely maximizing the total FBL rate with a target error probability, and minimizing the total utilized CBLs which is directly proportional to the transmission duration. The considered MOOP variables are the base station (BS) transmit power, number of CBLs, and passive beamforming at the RIS. Since the proposed non-convex problem is intractable to solve, the Tchebyshev method is invoked to transform it into a single-objective OP, then the alternating optimization (AO) technique is employed to iteratively obtain optimized parameters in three main sub-problems. The numerical results show a fundamental trade-off between maximizing the achievable rate in the FBL regime and reducing the transmission duration. Also, the applicability of RIS technology is emphasized in reducing the utilized CBLs while increasing the achievable rate significantly.
29 December 2022 in IEEE Internet of Things Journal
We study the joint active/passive beamforming and channel blocklength (CBL) allocation in a nonideal reconfigurable intelligent surface (RIS)-aided ultrareliable and low-latency communication (URLLC) system. The considered scenario is a finite blocklength (FBL) regime and the problem is solved by leveraging a deep reinforcement learning (DRL) algorithm named twin-delayed deep deterministic policy gradient (TD3). First, assuming an industrial automation system, the signal-to-interference-plus-noise ratio and achievable rate in the FBL regime are identified for each actuator. Next, the joint active/passive beamforming and CBL optimization problem (OP) is formulated where the objective is to maximize the total achievable FBL rate in all actuators, subject to nonlinear amplitude response at the RIS elements, BS transmit power budget, and total available CBL. Since the formulated problem is highly nonconvex and nonlinear, we resort to employing an actor–critic policy gradient DRL algorithm based on TD3. The considered method relies on interacting RIS with the industrial automation environment by taking actions which are the phase shifts at the RIS elements, CBL variables, and BS beamforming to maximize the expected observed reward, i.e., the total FBL rate. We assess the performance loss of the system when the RIS is nonideal, i.e., with nonlinear amplitude response, and compare it with ideal RIS without impairments. The numerical results show that optimizing the RIS phase shifts, BS beamforming, and CBL variables via the TD3 method with deterministic policy outperforms conventional methods and it is highly beneficial for improving the network total FBL rate considering finite CBL size.
26 April 2023 in IEEE Communications Letters
Reconfigurable intelligent surface (RIS)-aided communication is a promising technology for 6G systems to reconfigure the propagation environment proactively. However, it requires efficient real-time channel training, which suffers excessive overhead. To resolve this challenge, taking advantage of sensing with radio waves and localization, we propose a novel environment-aware joint active/passive beamforming for RIS-aided wireless communication based on the new concept of channel knowledge map (CKM). In the proposed scheme, the user equipments (UEs) location information is combined with the radio environment information provided by CKM to achieve efficient beamforming without real-time training. Simulation results show the proposed scheme’s superior performance over training-based beamforming, which is also quite robust to errors related to UE’s location in practice.
23 March 2023 in IEEE Transactions on Vehicular Technology
Intelligent reflecting surfaces (IRSs) are a promising technology for future-generation wireless networks by extending coverage region to blind spots and increasing mmWave propagation paths in non-line of sight environments. User association (UA) in dense millimeter wave (mmWave) networks is vital to characterizing connections among base stations (BSs) and mobile users for load balancing, interference management, and maximizing network utility. However, it has yet to be examined thoroughly in a multi-IRS-aided network. This paper presents a new UA scheme that takes cell interference into account for a multi-cell mmWave cellular network aided with multiple IRSs. We formulate a network spectral efficiency maximization problem by jointly optimizing active beamforming (AB) at the BSs, passive beamforming (PB) at the IRSs, and user-BS association with consideration of the impact of IRSs. We then propose a computationally efficient iterative algorithm based on alternating optimization (AO) to resolve this intractable mixed-integer non-convex problem. A fractional programming technique is used to optimize active beamforming at the BSs and passive beamforming at the IRSs, and a penalization method combined with successive convex programming is applied for UA optimization, which is shown to reach the optimal solution. Simulation results show significant performance improvements obtained by the proposed algorithm, providing higher spectral efficiency compared to several benchmark algorithms, while having a low computational complexity.