The dispersion state or degree of agglomeration of graphene is known to have a significant influence on the percolation threshold and electrical conductivity of graphene-based polymer nanocomposites. In addition, an imperfectly conducting interface and tunneling-assisted interfacial conductivity can also affect the overall conductivity. In this paper, a continuum theory is developed that considers all these factors. We first present a two-scale composite model consisting of graphene-rich regions serving as the agglomerates and a graphene-poor region as the matrix. We then introduce the effective-medium theory to determine the percolation threshold and electrical conductivity of the agglomerate and the composite. To account for the effect of imperfect interfaces, a thin layer of interphase with low conductivity is introduced to build a thinly coated graphene, while to account for the contribution of electron hopping from one graphene to another, Cauchy's statistical function which can reflect the increased tunneling activity near the percolation threshold is introduced. It is shown that the percolation threshold of the nanocomposite is controlled by two dispersion parameters, a and b, and the aspect ratio of agglomerates, . It is also shown that the overall conductivity of the nanocomposite mainly depends on the intrinsic conductivity of graphene and polymer matrix, the intrinsic interfacial resistivity, and the tunneling-assisted hopping process. We highlight the conceived theory by demonstrating that a set of recently measured data on the percolation threshold and electrical conductivity of graphene/polystyrene nanocomposites can be well captured by it.
A continuum model that possesses several desirable features of the electrical conduction process in carbon-nanotube (CNT) based nanocomposites is developed. Three basic elements are included: (i) percolation threshold, (ii) interface effects, and (iii) tunneling-assisted interfacial conductivity. We approach the first one through the selection of an effective medium theory. We approach the second one by the introduction of a diminishing layer of interface with an interfacial conductivity to build a "thinly coated" CNT. The third one is introduced through the observation that interface conductivity can be enhanced by electron tunneling which in turn can be facilitated with the formation of CNT networks. We treat this last issue in a continuum fashion by taking the network formation as a statistical process that can be represented by Cauchy's probability density function. The outcome is a simple and yet widely useful model that can simultaneously capture all these fundamental characteristics. It is demonstrated that, without considering the interface effect, the predicted conductivity would be too high, and that, without accounting for the additional contribution from the tunneling-assisted interfacial conductivity, the predicted conductivity beyond the percolation threshold would be too low. It is with the consideration of all three elements that the theory can fully account for the experimentally measured data. We further use the developed model to demonstrate that, despite the anisotropy of the intrinsic CNT conductivity, it is its axial component along the CNT direction that dominates the overall conductivity. This theory is also proved that, even with a totally insulating matrix, it is still capable of delivering non-zero conductivity beyond the percolation threshold.
This work was driven by the need to understand the electromagnetic interference (EMI) shielding effectiveness (SE) of light weight, flexible, and high performance graphene composite foams, but as EMI SE of a material depends on its electrical conductivity, dielectric permittivity, and magnetic permeability, the investigation of these three properties also became a priority. In this paper, we first present a continuum theory to determine these three electromagnetic properties, and then use the obtained properties to evaluate the EMI SE of the foam. A two-scale composite model is conceived to evaluate these three properties, with the large one being the skeleton-void composite and the small one being the graphene-polymer composite that serves as the skeleton of the foam. To evaluate the properties of the skeleton, the effective-medium approach is taken as the starting point. Subsequently, the effect of an imperfect interface and the contributions of electron tunneling to the interfacial conductivity and Maxwell-Wagner-Sillars polarization mechanism to the dielectric constant are also implemented. The derived skeleton properties are then utilized on the large scale to determine the three properties of the composite foam at a given porosity. Then a uniform plane electromagnetic wave is considered to evaluate the EMI SE of the foam. It is demonstrated that the electrical conductivity, dielectric constant, and EMI SE of the foam calculated from the developed theory are in general agreement with the reported experimental data of graphene/PDMS composite foams. The theory is further proven to be valid for the EMI SE of solid graphene/epoxy and solid carbon nanotube/epoxy nanocomposites. It is also shown that, among the three electromagnetic properties, electrical conductivity has the strongest influence on the EMI shielding effectiveness.
In a piezoelectric-piezomagnetic composite, one of the most intriguing features of its characteristics is the presence of magnetoelectric coupling coefficient even though neither phase possesses such a property. This quantity is often considered to be the figure of merits, but its magnitude depends on the phase properties, connectivity, volume concentration, inclusion shape, and interfacial conditions. In this article, we develop a composite model with aligned spheroidal inclusions in the matrix to account for all these microstructural features. With a focus on the BaTiO3-CoFe2O4 (BTO-CFO) system, we demonstrate how its coupling coefficients, and , and voltage coefficients, and , depend on these factors. In particular, we show that a weak interface could significantly lower the coupling effect, 1-3 composites tend to deliver a stronger while 2-2 composites a stronger , and that CFO-in-BTO composites provide stronger coupling than BTO-in-CFO. We conclude by demonstrating that consideration of a weak interface is often essential to model a real system, and that experimentally measured for CFO-in-BTO falls below the ideal value of perfect interface but can be predicted by a weak interface model. For ready applications, explicit expressions of and of fibrous composites and multilayers are also given for both perfect and imperfect interface conditions.
Van der Waals (vdW) material Fe 5 GeTe 2 , with its long-range ferromagnetic ordering near room temperature, has significant potential to become an enabling platform for implementing novel spintronic and quantum devices. To pave the way for applications, it is crucial to determine the magnetic properties when the thickness of Fe 5 GeTe 2 reaches the few-layers regime. However, this is highly challenging due to the need for a characterization technique that is local, highly sensitive, artifact-free, and operational with minimal fabrication. Prior studies have indicated that Curie temperature TC can reach up to close to room temperature for exfoliated Fe 5 GeTe 2 flakes, as measured via electrical transport; there is a need to validate these results with a measurement that reveals magnetism more directly. In this work, we investigate the magnetic properties of exfoliated thin flakes of vdW magnet Fe 5 GeTe 2 via quantum magnetic imaging technique based on nitrogen vacancy centers in diamond. Through imaging the stray fields, we confirm room-temperature magnetic order in Fe 5 GeTe 2 thin flakes with thickness down to 7 units cell. The stray field patterns and their response to magnetizing fields with different polarities is consistent with previously reported perpendicular easy-axis anisotropy. Furthermore, we perform imaging at different temperatures and determine the Curie temperature of the flakes at ≈300 K. These results provide the basis for realizing a room-temperature monolayer ferromagnet with Fe 5 GeTe 2 . This work also demonstrates that the imaging technique enables rapid screening of multiple flakes simultaneously as well as time-resolved imaging for monitoring time-dependent magnetic behaviors, thereby paving the way towards high throughput characterization of potential two-dimensional (2D) magnets near room temperature and providing critical insights into the evolution of domain behaviors in 2D magnets due to degradation.