The measurement of trace gases has increasingly become a key technique in healthcare and other medical applications. Quartz-enhanced photoacoustic spectroscopy (QEPAS) is a suitable method that can provide the required characteristics in such applications for a comparatively low cost and small size. The quantitative detection and a low detection limit are also required by applications. In this paper, we present new results on sensing biomedically relevant gases using the on-beam QEPAS technique with some newly developed tunable high-power single-mode laser diodes based on GaSb material. The data processing and detection limit determination are done by a field programmable gate array device, as well as an automatic measurement of the resonance frequency.
A single ridge waveguide laser wavelength stabilized by a compact external Bragg grating cavity with an output power as much as 380 mW and a beam quality factor M2 of 1.3 is presented. A characterization concerning tunability by current, short-term optical linewidth, and intensity fluctuations is performed. The device exhibits a wavelength tuning factor at 780 nm of 0.5 pm/mA, a short-term optical linewidth of 18 kHz, and a low-frequency relative intensity noise of -136 dB/Hz. These characteristics allow a high resolution absorption spectroscopy of the D2 line of rubidium.
The wavelength, , range of contains strong spectral absorption lines of many gases used in health, industry, safety, and medicine and whose sensitive and quantitative detection is desirable. However, the performance of InP diode lasers markedly deteriorates beyond . In this paper we present new results on developing tunable high power single mode laser diodes based on the GaSb material system with emission in the wavelength range of .
Diamond is a potential host material for laser applications due to its exceptional thermal properties, ultrawide bandgap, and color centers, which promise gain across the visible spectrum. More recently, coherent laser methods offer improved sensitivity for magnetometry. However, diamond fabrication is difficult in comparison to other crystalline matrices, and many optical loss channels are not yet understood. Here, we demonstrate a continuous-wave laser threshold as a function of the pump intensity on nitrogen-vacancy (NV) color centers. To achieve this, we constructed a laser cavity with both an NV diamond medium and an intracavity antireflection-coated diode laser. This dual-medium approach compensates intrinsic losses of the cavity by providing a fixed additional gain below threshold of the diode laser. We observe a continuous-wave laser threshold of the laser system and linewidth narrowing with increasing green pump power on the NV centers. Our results are a major development toward coherent approaches to magnetometry.