The measurement of trace gases has increasingly become a key technique in healthcare and other medical applications. Quartz-enhanced photoacoustic spectroscopy (QEPAS) is a suitable method that can provide the required characteristics in such applications for a comparatively low cost and small size. The quantitative detection and a low detection limit are also required by applications. In this paper, we present new results on sensing biomedically relevant gases using the on-beam QEPAS technique with some newly developed tunable high-power single-mode laser diodes based on GaSb material. The data processing and detection limit determination are done by a field programmable gate array device, as well as an automatic measurement of the resonance frequency.
Molecular gases are highly relevant in healthcare, production control, safety, and environmental monitoring. They often appear in small concentrations. The measurement of trace gases has increasingly become a key technique in those domains. Quartz-enhanced photoacoustic spectroscopy (QEPAS) is a suitable method that can provide the required low detection limits in such applications at comparatively low cost and small size. For mobile implementation, the size of an entire sensor unit matters. In this paper, we present a QEPAS sensor that fits into a standard butterfly package, its characterization, and its application on and .
The MIR wavelength regime promises better gas detection possibilities than the NIR or the visible region because of the higher absorbencies simulated by HITRAN. In the MIR region are many important absorption lines of significant gases, which are relevant in healthcare, production supervision, and safety and environmental monitoring. One of those gases is methane. CH4 shows significant variations in absorbance with a maximum at 3.3 μm, which results in low detection limits in the range of low ppm. Interband-cascade- and quantum-cascade-based lasers emit at higher wavelengths, where the absorbencies of methane are higher. The comparison is done by analyzing the performance of two spectroscopy applications: tunable diode laser absorption spectroscopy and quartz-enhanced photoacoustic spectroscopy.
18 April 2019 in IEEE Journal of Selected Topics in Quantum Electronics
Widely tunable external cavity diode lasers (ECDLs) with a narrow linewidth have become a powerful tool for a variety of applications. The difficulty of the present generation of ECDLs is that they are designed as laboratory instruments and are limited due to their size, high costs, and sensitivity to external influences. In this paper, we present our new ECDL design based on a microelectromechanical system (MEMS) device. This design overcomes the previous drawbacks and offers an outstanding improvement of the most important properties. Moreover, it can be adapted to any wavelength of interest and by using MEMS technology, costs can be reduced.
Although many valuable research works have investigated the properties of optical networks-on-chip (ONoCs), the vast majority of them lack an accurate exploration of the network interface architecture (NI) required to support optical communications on the silicon chip. The complexity of this architecture is especially critical for a specific kind of ONoCs: wavelength-routed ones. From a logical viewpoint, they can be considered as full nonblocking crossbars, thus the control complexity is implemented at the NIs. To our knowledge, this paper proposes the first complete NI architecture for wavelength-routed optical NoCs, by coping with the intricacy of networking issues such as flow control, buffering strategy, deadlock avoidance, serialization, and above all, with their codesign in a complete architecture
Many crossbenchmarking results reported in the open literature raise optimistic expectations on the use of optical networks-on-chip (ONoCs) for high-performance and low-power on-chip communication. However, most of those previous works ultimately fai...