Nowadays, the optimally developed system design has been important with the improvement of the technology. The mathematical model approach with the proper controller design provides a more efficient system with its outputs, as well. One of the complex structures is the alpha type Stirling motor in which it is used to control two independent pistons for gaining more power and but makes controlling its dynamics difficult due to its complex structure dynamics in terms of heat and mechanics interactions. In addition to these difficulties, it must be required to design optimal control via system dynamics perspectives because of the characteristics of four different phases. Due to these reasons, in this study, nonlinear Lyapunov-based optimal control for alpha type stirling engine was performed by combining ideal thermodynamic and mechanic equations. The suggested controller was tested under the different reference motor velocities by calculating optimal heat energy consumption via the control rule. After designing two cascade controllers, both mechanical and heat system controls were achieved to optimize heat energy consumption for different motor velocities. It was proved that the proposed method attained high performance for reference tracking of alpha Stirling motor velocities by interacting heat-mechanical system dynamics modeling via Lyapunov control theory.
Nowadays, gimbal systems have been a very critical role to obtain some important information related to live images photos and target detection in unmanned aerial vehicles. The most basic performance criterion of gimbal systems depends on its stabilization in which the desired reference tracking must be accomplished by designing complex controller structure. For this purpose, a discrete controller design is presented to provide reduced cost, high-performance, 3-axis gimbal systems in real-time operation. Firstly, the mathematical model of the system was obtained and 3D – computer aided design was made in order to calculate the system parameters like inertia, damping factor, etc. After that forward and inverse kinematic equations for the gimbal system were obtained in order to calculate the reference degree in each axis. The discrete controller was derived from energy-based computed torque proportional controller which was based on the Lyapunov Stability Theorem in discrete notation. The reference tracking results at 10 milliseconds sampling time are as follows; 0 overshoot for 3 axes with lack of steady-state errors, and the time constants are 0.1575, 0.1610, and 0.27 second which are acceptable for roll, pitch, and yaw axes, respectively. In addition, the discrete-time performance of the proposed controller was compared with a PID controller designed in continuous time, and it was shown that the continuous-time design did not work efficiently as well as discrete time one.