1 April 2020 in APL Photonics
A multispectral image camera captures image data within specific wavelength ranges in narrow wavelength bands across the electromagnetic spectrum. Images from a multispectral camera can extract a additional information that the human eye or a normal camera fails to capture and thus may have important applications in precision agriculture, forestry, medicine, and object identification. Conventional multispectral cameras are made up of multiple image sensors each fitted with a narrow passband wavelength filter and optics, which makes them heavy, bulky, power hungry, and very expensive. The multiple optics also create an image co-registration problem. Here, we demonstrate a single sensor based three band multispectral camera using a narrow spectral band red–green–blue color mosaic in a Bayer pattern integrated on a monochrome CMOS sensor. The narrow band color mosaic is made of a hybrid combination of plasmonic color filters and a heterostructured dielectric multilayer. The demonstrated camera technology has reduced cost, weight, size, and power by almost n times (where n is the number of bands) compared to a conventional multispectral camera.
22 July 2016 in IEEE Transactions on Emerging Topics in Computing
Null Convention Logic (NCL) is a robust asynchronous technique that poses new challenges to test and testability strategies due to the lack of a clock signal and the state-holding behavior of the NCL gates. The lack of deterministic timing in NCL complicates the management of test timing, and stuck-at faults on gate internal feedback (GIF) of the NCL gates exhibit a totally different effect compared to that of stuck-at faults on the gate inputs. Stuck-at faults on gate internal feedback of NCL gates do not always cause an incorrect output and therefore are considered hard-to-detect or undetectable by automatic test pattern generation (ATPG) algorithms. Such faults could leave the primary outputs of the circuit completely unaffected or sometimes they only affect the circuit by early detection of completeness. This work first proposes a clock-less self-timed ATPG, with no added design for test (DFT), that detects all of the faults on the gate inputs and a share of those on the GIF of gates. Then, this work investigates the effectiveness of IDDQ (quiescent current) test for detecting stuck-at faults on GIF of NCL gates. Hspice is used for implementing static and semi-static transistor-level NCL gates in (45nm, 1.1V) technology, for which the supply current is measured and compared for fault-free and faulty circuits. The experimental results show that the faulty current is orders of magnitude higher than the fault-free leakage current. This considerable difference shows that IDDQ testing might be an efficient and low-cost candidate for detecting stuck-at faults on GIF of NCL gates. The proposed IDDQ test method along with the self-timed ATPG has resulted in average 98.16% and 98.04% fault coverage for static and semi-static implementations of several NCL circuits, respectively. To the extent of our knowledge, this is the first work that has addressed clock-less, self-timed ATPG for NCL with no area overhead, and also the first work conducted on IDDQ test for NCL.
19 October 2018 in IEEE Photonics Journal
Plasmonic filters are excellent candidates for spectral filters in the near infrared spectrum. Such filters require only a single nanoscale thickness perforated metal film that can be tailored to tune the location of the transmission maximum. Here, we demonstrate using computational methods a double coaxial aperture array (DAA) in a hexagonal geometry that can be tuned to produce plasmon resonances accompanied by strong transmission in the nearinfrared spectrum and at telecommunication wavelengths with a peak wavelength insensitive to angle of incidence. The DAA consists of two concentric annular apertures and radial distance between the two apertures is varied to tune the resonant wavelength. The presented geometry finds potential applications in modulators for telecommunication, spectroscopy, solar cells, highresolution CMOS image sensors, chemical sensors and biosensors.