1 May 2015 in Combustion, Explosion, and Shock Waves
The paper presents empirical and numerical models of characteristics of a crater emerged from a surface explosion of a small TNT charge on the soil. The proposed models can be useful for estimation of the explosive mass based on the crater characteristics. The models show satisfactory fitting with the experimental results and confirm the hypothesis that the crater characteristics depend on the explosive mass and contact area between the charge and the soil surface. Two equations for estimation of the explosive mass based on the crater volume are proposed.
5 September 2011 in Science & Justice
The method of choice used by most terrorists for achieving political goals remains the utilization of explosive devices and there is always visible evidence at a crime scene after the deployment of such devices. Given favorable circumstances, forensic analysis can determine the cause of the explosion - the type of the explosive device, the means of detonation, the type and mass of the explosive charge that has been used and perhaps provide information to lead to the identity of the individual who may have constructed or deployed the explosive device, etc. Evidence of an explosion may take the form of a crater or other damage which may provide some information facilitating and estimating the mass of explosive material used. This paper reports the findings obtained by performing experimental explosions of known charges on a concrete surface, in order to establish the correlation between the charge weight and the effects of the explosion. Known masses of explosives were fired and the dimensions of craters made by explosions were measured. Five empirical equations for estimation of the explosive charge mass from crater dimensions were used.
1 January 2023 in Bezbednost, Beograd
When the papillary lines of the skin of fingers, palms and soles come into contact with the touched surface, a fingermark is created, which can be used to identify the person who left the evidence. The quality and usability of a fingermark as evidence for identification may depend on many factors. In order to justify the research, a statistical overview of the number of investigations performed at the crime scene with evidence found in general, as well as the number of fingermarks found, was presented. Given that the number of fingermarks found at the scene of crime in the territory of the police unit for the city of Belgrade is very large, and the percentage of identification of persons based on fingerprints is in the single digits, there is space for its increase. The success of personal identification could be improved by introducing new methods for visualizing fingermarks. The paper provides an overview of existing methods for visualizing latent fingermarks at the scene, as well as a comparison of individual methods for visualizing latent fingermarks on metal surfaces, such as copper. The method of metal deposition and the method of applying fingerprint (conventional) powders, based on carbon (instant black), on a metal surface such as copper, were used. A comparison of the visualized fingermarks was performed and their quality, i.e. potential for identification of persons was determined. The application of electrochemical metal deposition for the visualization of latent fingermarks gave satisfactory results with certain limitations, including the following: it is necessary to find a fingermark on an electrically conductive substrate; it is necessary to apply the method on the equipment located in the laboratory, on condition that the object with the latent fingermark is portable and of suitable dimensions and mass so that it can be immersed in the cell for electrolysis.
1 January 2024 in Vojnotehnicki glasnik
Introduction/purpose of the research: Latent fingermarks can be found on the crime scene on various surfaces and made visible by different forensic methods. As this evidence can often be found on brass surfaces (ammunition casings, decorative items, etc.) the paper discusses the possibilities of applying electrochemical deposition of nickel on brass. The condition for the application of this technique is the existence of a conductive substrate. Fatty components of latent fingermarks have insulating properties and prevent the electrodeposition process. Methods: Experimental thin rectangular pieces of brass foil were used as substrates for latent fingermarks. Samples were degreased in acetone and ethyl alcohol, rinsed in deionized water, and dried in a stream of compressed air before leaving the fingermarks. To enhance the presence of sweat on friction ridges, the hand was placed in the silicone glove for five minutes. A slight touch of the index finger was left on the tiles. Fingermarks were developed on brass samples by fingerprint powder and the electrochemical deposition of nickel on another brass surface simultaneously. In order to obtain the best possible evidence, the parameters affecting the deposition rate (current density, deposition time) were changed until a clear fingermark was obtained. Results: The fingermarks were compared visually using a magnifying glass with illumination to observe the contrast between the papillary lines and the interpapillary space and the characteristic details (minutiae). The optimal results were achieved with the current density (deposition rate) of 50mA/cm2 for 10s. Conclusion: Electrochemical deposition of nickel on brass is an applicable technique for developing latent fingermarks with certain limitations.
1 January 2024 in Nauka bezbednost policija
Court expert plays important role in the road traffic accident expertise. The question is how to select an appropriate court expert and what guarantees the quality of expertise. A road traffic accident expertise requires expert competencies and a comprehensive court expert register. The analysis of expert competencies in the road traffic area is performed by surveying the available data from the registers of Serbia, Montenegro, Bosnia and Herzegovina, and North Macedonia (non-EU states) and Croatia and Slovenia (the EU states). A comparative review of legal solutions in the observed states was done in order to consider the legal bases for expertise. Proposal for improvement is made. The capacity indicators of states for performing expertise were defined and an analysis was carried out showing the highest load was on the Slovenian experts (1 day per expertise), while in Bosnia and Herzegovina-District of Brčko the indicator amounted to 34 days per expertise.
30 April 2025 in Kultura polisa
Explosive substances as dangerous substances are used to commit crimes both with the intention and negligence. With regards to the properties of the explosive substance its use may cause very serious consequences for the life and health of people and the environment. Problems that may arise are certain difficulties in defining the scene of the crime where an investigation should be carried out, because the evidence may be scattered over a large area and destroyed and covered too. This paper discusses the classification and analysis of crimes committed with the use of explosive substances provided in the Criminal Law of the Republic of Serbia, as well as the criminal procedural characteristics of the crime scene investigation according to the Criminal Procedure Code of the Republic of Serbia. Special attention was paid to the criminal aspects of crime scene investigation in such cases with a focus on finding, preserving and significance of traces of explosive substances and other physical evidences with some empirical data – the number of crimes committed with/without explosions and verdicts, too. The aim of the research is solving the problem of the organisation of crime scene investigation. The result of the research is recommended model for crime scene investigation with the use of explosive substances as an attempt to improve the crime scene investigation. In order to justify the research, the statistical representation of the number of criminal acts with the use of explosive substances in the Republic of Serbia from 2017 till 2021 is presented.