14 September 2023 in Journal of Plasma Physics
We present a novel method for numerically finding quasi-isodynamic stellarator magnetic fields with excellent fast-particle confinement and extremely small neoclassical transport. The method works particularly well in configurations with only one field period. We examine the properties of these newfound quasi-isodynamic configurations, including their transport coefficients, particle confinement and available energy for trapped-electron-instability-driven turbulence, as well as the degree to which they change when a finite pressure profile is added. We finally discuss the differences between the magnetic axes of the optimized solutions and their respective initial conditions, and conclude with the prospects for future quasi-isodynamic optimization.
3 October 2022 in Journal of Plasma Physics
We develop the formalism of the first-order near-axis expansion of the magnetohydrodynamic equilibrium equations described by Garren & Boozer (Phys. Fluids B, vol. 3, issue 10, 1991, pp. 2805–2821) and Plunk et al. (J. Plasma Phys., vol. 85, issue 6, 2019; J. Plasma Phys., vol. 87, issue 6, 2021) for the case of a quasi-isodynamic, $N$ -field-period, stellarator-symmetric, single-well magnetic field equilibrium. The importance of the magnetic axis shape is investigated, and we conclude that control of the curvature and torsion is crucial to obtain omnigenous configurations with finite aspect ratio and low effective ripple, especially for a higher number of field periods. For this reason a method is derived to construct classes of axis shapes with favourable curvature and torsion. Solutions are presented, including a three-field-period configuration constructed at an aspect ratio of $A=20$ , with a maximum elongation of $e=3.2$ and an effective ripple under $1\,\%$ , which demonstrates that high elongation is not a necessary feature of quasi-isodynamic stellarators.
28 September 2022 in Journal of Plasma Physics
A single-field-period quasi-isodynamic stellarator configuration is presented. This configuration, which resembles a twisted strip, is obtained by the method of direct construction, that is, it is found via an expansion in the distance from the magnetic axis. Its discovery, however, relied on an additional step involving numerical optimization, performed within the space of near-axis configurations defined by a set of adjustable magnetic field parameters. This optimization, completed in 30 s on a single CPU core using the SIMSOPT code, yields a solution with excellent confinement, as measured by the conventional figure of merit for neoclassical transport, effective ripple, at a modest aspect ratio of eight. The optimization parameters that led to this configuration are described, its confinement properties are assessed and a set of magnetic field coils is found. The resulting transport at low collisionality is much smaller than that of W7-X, and the device needs significantly fewer coils because of the reduced number of field periods.
26 March 2025 in Journal of Plasma Physics
We provide an assessment of the Infinity Two fusion pilot plant (FPP) baseline plasma physics design. Infinity Two is a four-field period, aspect ratio $A = 10$ , quasi-isodynamic stellarator with improved confinement appealing to a max- $J$ approach, elevated plasma density and high magnetic fields ( $ \langle B\rangle = 9$ T). Here $J$ denotes the second adiabatic invariant. At the envisioned operating point ( $800$ MW deuterium-tritium (DT) fusion), the configuration has robust magnetic surfaces based on magnetohydrodynamic (MHD) equilibrium calculations and is stable to both local and global MHD instabilities. The configuration has excellent confinement properties with small neoclassical transport and low bootstrap current ( $|I_{bootstrap}| \sim 2$ kA). Calculations of collisional alpha-particle confinement in a DT FPP scenario show small energy losses to the first wall ( ${\lt}1.5 \,\%$ ) and stable energetic particle/Alfvén eigenmodes at high ion density. Low turbulent transport is produced using a combination of density profile control consistent with pellet fueling and reduced stiffness to turbulent transport via three-dimensional shaping. Transport simulations with the T3D-GX-SFINCS code suite with self-consistent turbulent and neoclassical transport predict that the DT fusion power $P_{{fus}}=800$ MW operating point is attainable with high fusion gain ( $Q=40$ ) at volume-averaged electron densities $n_e\approx 2 \times 10^{20}$ m $^{-3}$ , below the Sudo density limit. Additional transport calculations show that an ignited ( $Q=\infty$ ) solution is available at slightly higher density ( $2.2 \times 10^{20}$ m $^{-3}$ ) with $P_{{fus}}=1.5$ GW. The magnetic configuration is defined by a magnetic coil set with sufficient room for an island divertor, shielding and blanket solutions with tritium breeding ratios (TBR) above unity. An optimistic estimate for the gas-cooled solid breeder designed helium-cooled pebble bed is TBR $\sim 1.3$ . Infinity Two satisfies the physics requirements of a stellarator fusion pilot plant.
24 March 2025 in Journal of Plasma Physics
Transport characteristics and predicted confinement are shown for the Infinity Two fusion pilot plant baseline plasma physics design, a high field stellarator concept developed using modern optimization techniques. Transport predictions are made using high-fidelity nonlinear gyrokinetic turbulence simulations along with drift kinetic neoclassical simulations. A pellet-fuelled scenario is proposed that enables supporting an edge density gradient to substantially reduce ion temperature gradient turbulence. Trapped electron mode turbulence is minimized through the quasi-isodynamic configuration that has been optimized with maximum-J. A baseline operating point with deuterium–tritium fusion power of $P_{{fus,DT}}=800$ MW with high fusion gain $Q_{{fus}}=40$ is demonstrated, respecting the Sudo density limit and magnetohydrodynamic stability limits. Additional higher power operating points are also predicted, including a fully ignited ( $Q_{{fus}}=\infty$ ) case with $P_{{fus,DT}}=1.5$ GW. Pellet ablation calculations indicate it is plausible to fuel and sustain the desired density profile. Impurity transport calculations indicate that turbulent fluxes dominate neoclassical fluxes deep into the core, and it is predicted that impurity peaking will be smaller than assumed in the transport simulations. A path to access the large radiation fraction needed to satisfy exhaust requirements while sustaining core performance is also discussed.
18 December 2023 in Journal of Plasma Physics
In this study, we explore the influence of the helicity of the magnetic axis – defined as the self-linking number of the curve – on the quality of quasi-isodynamic stellarator-symmetric configurations constructed using the near-axis expansion method (Plunk et al., J. Plasma Phys., vol. 85, 2019, 905850602; Camacho Mata et al., J. Plasma Phys., vol. 88, 2022, 905880503). A class of magnetic axes previously unexplored within this formalism is identified when analysing the axis shape of the QIPC configuration (Subbotin et al., Nucl. Fusion, vol. 46, 2006, p. 921): the case of half-helicity (per field period). We show that these shapes are compatible with the near-axis formalism and how they can be used to construct near-axis stellarators with up to five field periods, $\def\iotaslash{{\require{HTML} \style{display: inline-block; transform: rotate(-13deg)}{\iota}}\kern-7pt{\require{HTML} \style{display: inline-block; transform: rotate(-25deg)}{-}}}{\epsilon _{\mathrm {eff}}} \approx 1.3\,\%$ , and similar rotational transform to existing conventionally optimized designs, without the need of a plasma boundary optimization.