In the 21th century, renewable energy has to play very important role in socio-economic and industrial development. This paper evaluates the exergy- energy analysis, which is based on the second law of thermodynamics. The triangular solar heater is developed to determine the heat transfer rate, thermal efficiency, exergy efficiency and Bejan number. In addition, we have examined the effects of entropy generation with respect to solar radiation and ambient temperature of air. Absorber plates coated with graphene and copper oxide nano-particles by the different percentages (0.1%, 0.2%, 0.3% & 0.4%) doped into black paint which increases the absorption of heat. The Reynolds number (4500≤R_e≤22700) varies for the fixed selective coating on absorber plate and mass flow rate. The experimental observations were performed for constant mass flow rate of air ranging from 0.0035kg/s to 0.018 kg/s. The experimental result gives the average thermal efficiency enhancement of 3.58% for 0.3% graphene/CuO-black paint. Entropy generation is more for 0.1% and minimum for 0.3% graphene/CuO-black paint coating. The entropy generation analysis concludes that the entropy generation increases with increasing the mass flow rate. Exergy efficiency enhancement can be found 0.169%for 0.3% with respect to 0.1% graphene/CuO-black paint.
5 July 2022 in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
The current study aims to improve the energy storage capability of the thermal energy storage system by utilizing multiple phase-change materials. In this regard, a new thermal energy storage system has been studied when multiple phase-change material with different melting temperatures are employed. In this study, three-set, each having 70 encapsulated phase-change materials, are arranged horizontally in the order of decreasing melting temperature for the charging cycle and increasing melting temperature in the case of discharging cycle. Water is employed as heat transfer fluid, and the SAE 304 spherical capsule with a diameter of 60 cm is used to encapsulate the phase-change material. The arrangement showed an excellent thermal response for input parameters such as inlet temperature, flow rate. Further, it was observed that as the heat transfer fluid flow rate increases from 1 litres per minute (LPM) to 5 LPM, the melting and solidification time decreases from 10% to 30% and 14% to 28%, respectively. It was also noticed that as the flow rate increases, exergy and overall efficiency decreases.