A modified-templated-hydrothermal technique was used to prepare mesoporous titania powders through the interaction of tiny anatase seeds (<5 nm) with block-copolymer Pluronic P123 in the presence (acidic route) and absence of HCl (neutral route). The calcined neutral powders featured a full anatase crystalline domain with high surface area (106.0 m2 g−1) and large pore sizes (8.0 nm). Meanwhile, the acidic route produced higher surface area (156.7 m2 g−1), larger pores (9.7 nm) and a mixture of anatase and rutile crystalline phases. The neutral route derived titania films showed higher DSSC performance up to a global efficiency of 5% using N3-ruthenium complex dye.
A new phosphonate modified silica (PMS) has been investigated for adsorption of Co(II), Ni(II), Cu(II), and Zn(II) in aqueous solution. The adsorbent was modified of silica by immobilizing aminoethyl dihydrogen phosphate (AEPH2) on 1,4-dibromobutane grafted silica. The physicochemical of the adsorbent was investigated using Fourier Transform Infra-red (FTIR) spectroscopy, X-ray Fluorescence (XRF), and N2 gas adsorption/desorption. The adsorption study was carried out in a batch system by mixing solution of metal ions at various pHs, contact times, and initial metal ion concentrations. The unadsorbed metals were determined by Flame Atomic Absorption Spectrophotometry (FAAS). Result of characterization showed that PMS has been successfully prepared. The product contained 45.99% (w/w) silica and 1.33% (w/w) phosphorous with surface area, pore volume, and pore size of 115.3 m2g-1; 0.7578 mLg-1; and 131.44 Å, respectively. Adsorption of metal ions on PMS occurred quite fast, less than 30 min. Modification of phosphonate on silica increased the adsorption capability, up to 8 times higher than that of unmodified silica, depending on metal ion type and pH solution. The capacity order of the metals adsorption was Cu(II)>Co(II)>Ni(II)>Zn(II). Based on the adsorption characteristic, the adsorbent is promising to be applied as a material for solid phase extraction of transition metal ions.
1 August 2004 in Journal of Sol-Gel Science and Technology
Developing carbon-based nanomaterials from waste sources has offered versatile applications and a sustainable solution to environmental pollution. A sustainable approach to recycle plastic bag waste into carbon quantum dots (CQDs) using modified pyrolysis and hydrothermal methods with a low concentration of hydrogen peroxide as an oxidant (< 7 wt%) was proposed. Parameter optimization, such as pyrolysis product mass, hydrothermal time, and hydrogen peroxide concentration, was investigated. In this study, CQDs with a high quantum yield of 10.04% were successfully synthesized in a short time of 10 h. Compared to standalone pyrolysis or hydrothermal methods, the integrated pyrolysis-hydrothermal approach enhanced CQDs synthesis efficiency by achieving a shorter reaction time, lower processing temperature, and improved quantum yield. In addition, remarkable fluorescence stability of CQDs was acquired under UV light exposure, in various ionic strengths, and during prolonged storage. The size distribution of CQDs was 1.5–4.5 nm with a defected graphitic structure caused by incorporated oxygenated functional groups, such as carboxyl, carbonyl, and hydroxyl. The presence of these functional groups facilitated selective interaction between CQDs and Fe3+ ions. Therefore, these CQDs showed high selectivity and sensitivity for Fe3+ ions in water, with a good correlation coefficient of 0.9983 and a low limit of detection of 9.50 µM. This research highlighted the potential of converting plastic waste into valuable nanomaterials, offering a cost-effective and eco-friendly solution for using plastic waste in advanced sensing materials for metal ions. Graphical Abstract
In the present research, a modified post-hydrothermal treatment with different temperature of 80-150°C has been applied on as-annealed TiO2 nanotubes derived from conventional hydrothermal process. The treatment has two-fold objectives, i.e. enhancing the nanocrystallinity of anatase TiO2, and at the same time maintaining the integrity of nanotube structures. The resulting TiO2 nanotubes were characterized by using XRD and UV-Vis spectroscopy. The XRD analysis revealed that the as dried TiO2 nanotubes contain combined crystalline structures of sodium-titanate and anatase. It was also found that by increasing the post-hydrothermal temperature from 80 to 150°C, the nanocrystallinity of nanotubes enhances as indicated by increasing the crystallite size of anatase TiO2 from 6.93 to 7.81 nm. The anatase crystallite growth affected the optical characteristic of nanotubes, as represented with the reduction of the band gap energy, Eg from 3.75 to 3.67 eV by using Kubelka-Munk analysis for the obtained UV-Vis reflectance spectra. TEM observation confirms that the integrity of nanotubes structure can be well-maintained upon post-hydrothermal treatment.