1 January 2024 in Engineering Perspective
The application of Self-Compacting Concrete (SCC) in the construction industry has been adopted over the years and its quality over normal concrete has been influential. The high-rise construction demands emphasize the necessity of concrete pumping technology due to limited working space. Concrete made from manufactured sand was produced and the variation of free fall height based on the experiment of SCC was studied. This study assesses both the mechanical properties of SCC cast after free fall from various heights and its applications in the CFST columns. The study specifically focuses on a varied height of free fall at 6m, 6.5m, 7m, 7.5m, and 8m. The workability performance of this SCC, batched from manufactured sand has been evaluated, and slump extension between 500-600 mm was obtained. The concrete cubes and prism specimens were tested for compressive and splitting, therefore the associate strength was obtained. Testing both normal and SCC reveals unfavourable effects in strength reduction with an increase in free fall height. At the final height of 8m, an observed decrease in strength of about 15%-20% using SCC was observed. At 6.5m, there is a 3% decrease in strength, and the reduction in cube-splitting strength ranges from 7% to 11% with SCC from natural sand. When the free fall height is 7m, the cubic compressive strength is reduced by about 4.3-5.4%, and its cube-splitting strength at a height of 7m decreases by approximately 7–11%. Despite the gradual decrease noted in this study, the application of SCC obtained at 7m in CFST has demonstrated reliable results in terms of combined strength, suggesting its use in columns not exceeding the same height.
29 June 2026 in The Baltic Journal of Road and Bridge Engineering
This study investigates how traffic heterogeneity affects both traffic-flow efficiency and bridge structural demand using one year of road-based Weigh-in-Motion (WIM) data collected on a 60 m two-span simply supported prestressed-concrete girder bridge in Nanjing, China. The objective was to develop an integrated framework for quantifying the joint influence of vehicle composition on traffic performance and bridge load effects, and to evaluate whether operational mitigation measures can improve both mobility and structural performance. The methodology combined data preprocessing, vehicle classification, macroscopic traffic-flow modelling, statistical analysis, influence-line-based structural load-effect estimation, machine-learning prediction, and simulation-based intervention evaluation. Traffic-flow relationships were analysed using the Greenshields’s, Greenberg’s, and Underwood’s models, while XGBoost and SHAP were applied to predict and interpret traffic and structural indicators derived from the processed WIM dataset. The results showed that increasing heavy-vehicle proportion reduced traffic efficiency by lowering flow and speed and increasing density, while simultaneously increasing predicted bending moment, shear force, and fatigue-related demand. Among the calibrated traffic-flow models, the Underwood’s model achieved the lowest RMSE, while the Greenshields’s model remained highly competitive and was retained because of its simpler and more interpretable formulation. The scenario analysis further indicated that both lane management and speed harmonization reduced structural demand relative to the baseline observed traffic condition, with lane management providing the greater overall benefit. The proposed framework is intended as an analytical and scenario-based decision-support methodology for evaluating bridge traffic-management strategies under heterogeneous traffic conditions.