Jean Claude SUGIRA

Mr. Jean Claude SUGIRA

School of Transportation, Southeast University, Nanjing, Jiangsu, China
orcid

Research Focus & Metrics

Academic Career Length

1Year (2026-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

1 January 2024 in Engineering Perspective
Verified
Journal Article
Closed access
JNJean de Dieu Ninteretse
Jean de Dieu Ninteretse
Jovial NiyogisubizoJovial Niyogisubizo
Jovial Niyogisubizo
MNMarc Nshimiyimana
Marc Nshimiyimana
JSJean Claude SUGIRA
Jean Claude SUGIRA
ANALAIN NIYONGABO
ALAIN NIYONGABO
The application of Self-Compacting Concrete (SCC) in the construction industry has been adopted over the years and its quality over normal concrete has been influential. The high-rise construction demands emphasize the necessity of concrete pumping technology due to limited working space. Concrete made from manufactured sand was produced and the variation of free fall height based on the experiment of SCC was studied. This study assesses both the mechanical properties of SCC cast after free fall from various heights and its applications in the CFST columns. The study specifically focuses on a varied height of free fall at 6m, 6.5m, 7m, 7.5m, and 8m. The workability performance of this SCC, batched from manufactured sand has been evaluated, and slump extension between 500-600 mm was obtained. The concrete cubes and prism specimens were tested for compressive and splitting, therefore the associate strength was obtained. Testing both normal and SCC reveals unfavourable effects in strength reduction with an increase in free fall height. At the final height of 8m, an observed decrease in strength of about 15%-20% using SCC was observed. At 6.5m, there is a 3% decrease in strength, and the reduction in cube-splitting strength ranges from 7% to 11% with SCC from natural sand. When the free fall height is 7m, the cubic compressive strength is reduced by about 4.3-5.4%, and its cube-splitting strength at a height of 7m decreases by approximately 7–11%. Despite the gradual decrease noted in this study, the application of SCC obtained at 7m in CFST has demonstrated reliable results in terms of combined strength, suggesting its use in columns not exceeding the same height.

25 May 2026 in Advances in Bridge Engineering
Verified
Journal Article
Open access
PDF file
JSJean Claude SUGIRA
Jean Claude SUGIRA
XZXiao-Yi Zhou
Xiao-Yi Zhou
JNJean de Dieu Ninteretse
Jean de Dieu Ninteretse
Accurate prediction of extreme bridge traffic load effects is essential for ensuring structural safety under increasing heavy-vehicle traffic. This study develops an analytical probability distribution model that directly links traffic condition parameters, bridge configuration parameters, and vehicle weight statistics to the parameters of the Type III Extreme Value Distribution (EVD). Using WIM data and MCS, short-term measurements were extended to long-term traffic, and bridge load effects were obtained through influence-line analysis. By correlating the EVD parameters with site-specific characteristics, semi-empirical analytical equations were derived that generalize Bailey’s model from European bridges to bridges in China. Results show that upper bound parameters remain consistent with theoretical limits, while the shape and position parameters require regional calibration due to heavier truck distributions. Validation using measured and simulated data confirms the model’s accuracy and applicability. The proposed analytical model provides a novel, efficient framework for region-specific prediction of extreme traffic load effects and supports reliability-based bridge design and assessment.

1 May 2026 in Sustainability
Verified
Journal Article
Open access
PDF file
XFXiao Fan
Xiao Fan
Philemon NiyogakizaPhilemon Niyogakiza
Philemon Niyogakiza
Qian ZHAIQian ZHAI
Qian ZHAI
JSJean Claude SUGIRA
Jean Claude SUGIRA
ECEdson da Graça Manuel Cumbe
Edson da Graça Manuel Cumbe
XLXiangzhao Liu
Xiangzhao Liu
Fine-grained dredged clay is difficult to reuse without treatment due to its high water content and weak soil structure. From a sustainability perspective, this limitation poses challenges for the beneficial reuse of dredged materials and often leads to disposal and increased demand for natural resources. In this study, the 28-day mechanical behavior of stabilized dredged clay, treated with cement or lime and modified with coir fiber, polypropylene (PP) fiber, and styrene–butadiene rubber (SBR) latex, was systematically investigated through experimental measurements, with an emphasis on resource-efficient and sustainable ground improvement. The unconfined compressive strength (UCS) results showed that the UCS of dredged clay stabilized with 4% cement was 374 kPa, and this value increased linearly with increasing cement content, reaching 2487 kPa at 16% cement. In contrast, the UCS of dredged clay stabilized with 16% lime was approximately 30% of that achieved with cement at the same dosage, at only 780 kPa, indicating the need to balance mechanical performance with the environmental impact associated with high cement usage and its carbon footprint. In addition, the inclusion of fibers significantly enhanced the UCS of the stabilized soil samples. The experimental results indicate that the UCS of specimens stabilized with 16% cement could be doubled with the addition of fibers, suggesting the potential to achieve target strength with reduced binder content, thereby contributing to a low-carbon and material-efficient design. Among the fibers tested, coir fiber exhibited better performance than PP fiber in improving UCS, highlighting the effectiveness of natural, renewable, and biodegradable materials in sustainable soil stabilization. Furthermore, fiber length also influenced the UCS of the stabilized soil samples. Additionally, the direct shear test results indicated that both fiber content and length played important roles in determining the internal friction angle of the stabilized soil. It was observed that stabilized soil reinforced with 6 mm fibers exhibited a higher internal friction angle compared to that reinforced with 12 mm fibers. These findings provide insights into optimizing material composition for improved mechanical performance while supporting environmentally sustainable and resource-efficient geotechnical practices.

1 January 2023 in Engineering Perspective
Verified
Journal Article
Closed access
JSJean Claude SUGIRA
Jean Claude SUGIRA
JNJean Pierre Nsengimana
Jean Pierre Nsengimana
NMNshimiyimana Marc
Nshimiyimana Marc
This paper investigates the capacity of weaving bottlenecks in Nanjing, where multiple traffic streams merge or diverge closely, causing significant traffic disruptions. Utilizing trajectory data from 862 vehicles collected through UAV cameras, the study assesses the bottleneck's capacity and performance measures, including traffic flow, speed, and lane occupancy. The analysis employs a combination of the Highway Capacity Manual (HCM) 2010 guidelines and PTV Vissim simulation software. The HCM 2010 framework provides a standardized approach for evaluating traffic flow characteristics and determining the level of service, while Vissim allows for the evaluation of diverse traffic scenarios. The results reveal that the bottleneck operates at Level of Service E (LOS E), characterized by high congestion, reduced speeds, and prolonged travel times. However, introducing ramp metering to the area improves conditions, resulting in a transition to Level of Service D (LOS D). This study emphasizes the potential of ramp metering to enhance bottleneck performance. Nevertheless, future research should explore other strategies, such as intelligent transportation systems and improved public transportation services, to encourage modal shifts and reduce private vehicle usage. By addressing these challenges, cities like Nanjing can mitigate traffic congestion and create more efficient and sustainable transportation systems. The findings provide valuable insights for urban planners and policymakers seeking evidence-based solutions to optimize traffic flow and mobility in busy cities. By adopting the HCM 2010 guidelines and simulation tools like Vissim, this study contributes to the development of efficient traffic management strategies, ultimately fostering more livable and accessible urban environments.

29 June 2026 in The Baltic Journal of Road and Bridge Engineering
Verified
Journal Article
Open access
PDF file
JSJean Claude SUGIRA
Jean Claude SUGIRA
MNMarc Nshimiyimana
Marc Nshimiyimana
JNJean De Dieu Ninteretse
Jean De Dieu Ninteretse
Philemon NiyogakizaPhilemon Niyogakiza
Philemon Niyogakiza
This study investigates how traffic heterogeneity affects both traffic-flow efficiency and bridge structural demand using one year of road-based Weigh-in-Motion (WIM) data collected on a 60 m two-span simply supported prestressed-concrete girder bridge in Nanjing, China. The objective was to develop an integrated framework for quantifying the joint influence of vehicle composition on traffic performance and bridge load effects, and to evaluate whether operational mitigation measures can improve both mobility and structural performance. The methodology combined data preprocessing, vehicle classification, macroscopic traffic-flow modelling, statistical analysis, influence-line-based structural load-effect estimation, machine-learning prediction, and simulation-based intervention evaluation. Traffic-flow relationships were analysed using the Greenshields’s, Greenberg’s, and Underwood’s models, while XGBoost and SHAP were applied to predict and interpret traffic and structural indicators derived from the processed WIM dataset. The results showed that increasing heavy-vehicle proportion reduced traffic efficiency by lowering flow and speed and increasing density, while simultaneously increasing predicted bending moment, shear force, and fatigue-related demand. Among the calibrated traffic-flow models, the Underwood’s model achieved the lowest RMSE, while the Greenshields’s model remained highly competitive and was retained because of its simpler and more interpretable formulation. The scenario analysis further indicated that both lane management and speed harmonization reduced structural demand relative to the baseline observed traffic condition, with lane management providing the greater overall benefit. The proposed framework is intended as an analytical and scenario-based decision-support methodology for evaluating bridge traffic-management strategies under heterogeneous traffic conditions.