8 November 2012 in Superconductor Science and Technology
4 February 2019 in IEEE Transactions on Applied Superconductivity
We present JoSIM, a SPICE based circuit simulator that utilizes the modified nodal voltage analysis method and trapezoidal integration to solve systems of linear equations. The objective of JoSIM is to provide accurate simulation results with major improvements in terms of simulation speed and expandability. JoSIM incorporates the ability to do phase-based simulation through a modified nodal phase analysis method. A full data visualization GUI, built using open-source graphical libraries, is included. We show the results of simulations with JoSIM and compare them to the results of JSIM, as well as comparisons between simulation times. We also show extremely large simulations which are not realizable in reasonable time using JSIM. The software tool is packaged and presented as part of ColdFlux project [1] under the SuperTools [2] program.
9 November 2011 in Superconductor Science and Technology
1 March 2017 in IEEE Transactions on Applied Superconductivity
This paper presents a row-based design methodology covering cell placement, clock tree synthesis, and routing steps for large SFQ circuits. The proposed placement tool initiates by running a state-of-the-art CMOS placer, which places fixed-height but variable-width cells in rows on the chip. Cells in each row are then grouped together such that each group contains at most k cells with the same logic level. Next, for clock routing, this paper proposes HL-tree, which adopts an H-tree with passive transmission line connections to distribute the clock to groups, and within each group, a linear path composed of splitters and Josephson transmission lines (JTLs) provides the clock to cells. Increasing k reduces the chip area, but also may incur a performance loss. To evaluate the effectiveness of the proposed approach, place-and-route results of a 32-bit Kogge-Stone adder for different values of k are reported. By using this new design methodology, the overall chip area can be reduced by 27% compared with the results of a conventional CMOS placement accompanied by an H-tree clock network.
10 January 2019 in IEEE Transactions on Applied Superconductivity
The IARPA SuperTools program requires the devel-opment of superconducting electronic design automation (S-EDA) and superconducting technology computer aided design (S-TCAD) tools aimed at enabling the reliable design of complex superconduct-ing digital circuits with millions of Josephson junctions. Within the SuperTools program, the ColdFlux project addresses S-EDA and S-TCAD tool research and development in four areas: (i) RTL synthe-sis, architectures and verification; (ii) analog design and layout syn-thesis; (iii) physical design and test; and (iv) device and process mod-eling/simulation and cell library design. Capabilities include, but are not limited to: device level modeling and simulation of Josephson junctions, modeling and simulation of the superconducting process manufacturing processes, powerful new electrical circuit simulation, parameterized schematic and layout libraries, optimization, com-pact SPICE-like model extraction, timing analysis, behavioral, reg-ister-transfer-level and logic syntheses, clock tree synthesis, place-ment and routing, layout-versus-schematic extraction, functional verification, and the evaluation of designs in the presence of mag-netic fields and trapped flux. ColdFlux consists of six research groups from four continents. Here we present an overview of the current and planned activities related to the project, and justify de-sign assumptions and decisions that were made to allow the devel-opment of design tools for million-gate circuits.
23 October 2019 in IEEE Transactions on Instrumentation and Measurement