With the advent of globalization, computing speed has increased tremendously, greatly advancing algorithm research in multiple fields. This paper studies the parameter optimization problem of the improved multipopulation genetic algorithm in the tuned mass damper (TMD) structure considering the soil‐structure interaction (SSI) effect. The Newmark time‐domain analysis method was used to analyze the dynamic response of a 40‐story building under the excitation of EL Centro waves and Tangshan waves in China, respectively. The mass, damping coefficient, and spring stiffness of TMD system are used as the design variables of the controller. To reduce structural damage and obtain better comfort, the displacement response and acceleration response are optimized simultaneously in this paper, achieving multiobjective optimization. The results show that the improved multipopulation genetic algorithm method has faster convergence speed and greater accuracy than the traditional genetic algorithm; thus it can be applied to the TMDs parameter optimization of high‐rise buildings. Besides, the soil types have a great influence on TMD parameter optimization and structural time history response. If ignoring SSI effect will lead to underestimation of parameter design, the reason is that the soft soil foundations can absorb a lot of seismic energy compared with rigid foundations and then reduce the effect of seismic excitation on the structure. The intention of the research helps researchers to better understand vibration control and provides suggestions for the application of TMD in high‐rise buildings.
Protoacoustics, the measurement of the pressure waves emitted by thermal expansion resulting from proton dose deposition, may be used to obtain the depth of the Bragg-peak (BP) by measuring the time-of-flight of the pressure wave. However, using the method in the clinic has a drawback since numerous measured signals were averaged to identify the accurate signal peak from the indistinguishable noises. We proposed a wavelet-based denoising method to significantly reduce noise in collected protoacoustic signals and improve the BP identification accuracy with fewer signal averages. The average 1024 signal, which has been used in the published study, was used as the reference to identify the accurate acoustic location. We used Daubechies (db) 4 wavelet transform to decompose the collected signals to recover the useful protoacoustic signals. Our approach was able to identify the BP signal up to the average 8 signals that correspond to the dose (<1.5 Gy). This denoising technique would be useful for future 2D/3D protoacoustic imaging and make protoacoustic clinically useful for proton range verification.
As an important structure in water transfer projects, aqueduct must be regularly tested to identify promptly and solve any potential defect such as cracks. However, there is no proper means to detect aqueducts crossing rivers. In this paper, a possible technical solution for UAV autonomous navigation flight was proposed for detections under aqueducts. For horizontal positioning, the UWB-based positioning technology was used to ensure the UAV positioning when the GPS signals were blocked; the smooth processing was employed in the sensor fusion between the GPS and UWB for seamless switchover between these two modes. For vertical positioning, the fusion of an millimeter wave (MMW) radar, a barometer, and an accelerometer improved the elevation measurement and control accuracy of the UAV, ensuring the auto focusing and clear imaging of the long-focal-length camera. The positioning tests under the aqueduct revealed that, the UAV had better accuracy than 30 cm in horizontal direction and above 10 cm in vertical direction.