The long-term stability of ultraviolet (UV)-C light-emitting diodes (LEDs) is of major importance for many applications. To improve the understanding in this field, we analyzed the degradation of AlGaN-based UVC LEDs and modeled the variation of electrical characteristics by 2D simulations based on the results of deep-level optical spectroscopy (DLOS). The increase in the forward leakage current observed during ageing was ascribed an increase in trap-assisted tunneling. The analysis of the degradation kinetics suggests the role of a defect diffusion process, possibly involving impurities coming from the p-type layers.
The lifetime of deep-ultraviolet light-emitting diodes (LEDs) is still limited by a number of factors, which are mainly related to semiconductor defects, and still need to be clarified. This paper improves the understanding of UV LED degradation, by presenting an analysis based on combined deep-level transient spectroscopy (C-DLTS), electro-optical characterization, and simulations, carried out before and during a constant current stress test. The original results of this paper are (i) C-DLTS measurements allowed us to identify three traps, two associated with Mg-related defects, also detected in the unaged device, and one related to point defects that were generated by the ageing procedure. (ii) Based on these results and on TCAD simulations, we explain the variation in the forward I–V by the degradation of the p-contact, due to Mg passivation. (iii) On the other hand, optical degradation is ascribed to an increase in defectiveness of the active region and surrounding areas, which led to a decrease in injection efficiency, to an increase in non-radiative recombination, and to an increase in trap-assisted tunneling processes.
The market of Ultraviolet (UV) Light Emitting Diodes (LEDs) is expected to expand substantially in the coming years, thanks to the disinfection properties of the UV light; however, a detailed study on the reliability-limiting processes is a fundamental step, for an effective deployment of this technology. We investigated the degradation mechanisms of AlGaN-based UV Single Quantum Well (SQW) LEDs, with a nominal emission wavelength of 265 nm, an area of 0.1 mm2 and a nominal current density of 100 A·cm-2. By means of constant current stress test and Capacitance Deep Level Transient Spectroscopy (C-DLTS) we studied the main electrical, optical, spectral and capacitance characteristics of the devices, in order to understand the dominant causes of degradation. For aged devices the electrical characterization shows increased subthreshold leakage currents, due to the increase in Trap Assisted Tunneling (TAT) components, as well as an increase in drive voltage, which is ascribed to contact degradation or a decrease in injection efficiency. The optical output power showed a decrease especially at low current levels, which has been ascribed to an increase in non-radiative recombination and suggests the generation of defects in the LED active region. C-DLTS measurements showed in unaged devices the presence of two defects in the structure, both ascribed to magnesium (Mg), located at 475 meV and 150 meV from the respective band. Moreover, we detected the increase in concentration of a third defect during the stress test with an activation energy of 700 meV, that acts as a point defect, and could be ascribed to gallium vacancies or nitrogen antisites.
1 November 2026 in IEEE Transactions on Electron Devices