25 August 2014 in Mineral Processing and Extractive Metallurgy Review
A new recycling technology has been studied in this work to produce magnesium chloride from wastes generated in chrysotile asbestos production. The steps include enrichment of raw material by sizing, leaching of magnesium with hydrochloric acid, purification of solution from impurities of iron and nonferrous metals, and the production of magnesium chloride solutions. Thermodynamic analysis shows the possibility of dissolution of magnesium compounds in the waste by hydrochloric acid. Magnesium chloride solution is subjected to hydrolytic purification from iron and nickel. Enrichment has been carried out with material particle size of 0.25 mm and liquid to solid ratio of 4:1 and leaching with 25% concentrated hydrochloric acid has been accomplished with a stoichiometric flow rate. Hydrolytic treatment was carried out at a pH 7.5–8.0. pH adjustment was carried out by magnesium oxide. Extraction of 92% of magnesium from serpentinite was achieved.
25 September 2021 in Kompleksnoe Ispolzovanie Mineralnogo Syra = Complex Use of Mineral Resources
AKAlmaty Rse «National Center On Complex Processing Of Mineral Raw Materials Of The Republic Of Kazakhstan»
Almaty Rse «National Center On Complex Processing Of Mineral Raw Materials Of The Republic Of Kazakhstan»
This article presents the technology of niobium recovery by processing of chloride residues generated during the chlorination of titanium slags. For waste processing, a two-stage leaching technology is proposed. Water is used at the first stage of leaching and hydrochloric acid 4.0 M is used at the second stage. For the purpose of sorption of niobium from the solution composition obtained during leaching, cation-exchange sorbents Purolite-C104 and KU-2-8 H were used. By the usage of Purolite-C104 ion exchange resin the sorption efficiency of niobium from a solution with a concentration of 2 g/l was about 71.0 % (0.071 g/g) in 3.5 hours, while for KU-2-8 H ion exchange resin, sorption efficiency was about 89.0 % (0.089 g/g).
15 December 2020 in Series of Geology and Technical Sciences
Heat storage materials on the basis of liquid paraffins and their narrow fractions with the set temperature of phase transition and the increased heat capacity for enclosing the structures of buildings are received. A method of formulating compositions heat-storage materials with melting temperatures below 250C and increased heat capacity from a mixture of narrow fractions of commodity paraffins is proposed. The technique of obtaining heat-storage materials on the basis of commodity paraffin by mixing components, in obtaining HSM with specified thermal characteristics, the research of component composition, physico-chemical and thermophysical properties, in the research of their operational properties. The technical conditions for the obtained heat- storage materials on the basis of commodity paraffins are developed and the possibility of their application in the enclosing structures of buildings is substantiated. The developed heat-storage material with the set operational properties provides energy saving due to increase of heat capacity and intensity of heat exchange of enclosing designs of buildings.
12 April 2021 in SERIES CHEMISTRY AND TECHNOLOGY
The article discusses the contributes to the development of a new focus on the use of various mixtures of natural raw materials and waste in the construction materials industry as a strategically important direction for solving the environmental burden and recycling industrial waste with a feasibility study that improves the state of the environment. This problem is particularly relevant in the production of building materials used in environmentally distressed areas of the republic and in conditions of intense corrosion and erosion wear. The production of efficient building materials and products that meet the modern requirements of environmental friendliness, basic physical and mechanical characteristics, availability and cost is an important and not fully solved task in the field of construction and the construction materials industry. Analysis have been conducted on the current state of the local availability of perspective materials for high-quality composite construction materials, their chemical and mineralogical and granulometric properties have been studied, the influence of the granulometric composition of the basic properties of a composite material and features of the structure formation during heat treatment were studies; physical and mechanical properties of the obtained compositions were tested. Optimal compositions and technological schemes for the production of composite materials based on the use of technogenic waste, natural raw materials and their mixtures have been developed to ensure the production of high-quality construction products with specified thermomechanical properties.The optimization of compositions and properties of compositions was carried out using mathematical planning methods, which made it possible to predict changes in the properties of composite materials depending on the number, weight of the components and the size of the filler granules. Experimental batches of at least 3 main types of construction products were obtained.